20
Setup Procedure
Ch
apt
e
r 3 Set
u
p
Chapter
Setup
Setup Procedure
Before the unit can be used, you must first make various
settings. This includes selecting the language and
currency, selecting the service mode, and setting up
passwords. These settings are made from the
administration screen. You can also use the administration
screen later to change settings and to adjust the unit.
To bring up the administration screen, proceed as follows.
• Before you can make settings on the administration
screen, you must enter the administrator password. In the
factory default condition, the administrator password is
set to “9999”.
• If a memory card is inserted in any of the front-side
memory card slots of the unit, the administration screen
does not come up. Remove any memory cards first, and
then repeat the procedure.
1
At the Start Guide display, touch the top left corner of
the screen twice in succession.
The password entry screen appears.
2
Enter the password using the numeric keypad.
3
Touch the [OK] button.
The administration screen appears.
By touching one of the tabs at the top of this screen,
you can select the respective category to make
settings. For details on each category, see the section
(System) tab
Lets you select the language to be used by the system,
the beep ON/OFF setting, and the computer
connection function.
The touch panel adjustment can also be performed
from this tab.
(Screens) tab
Lets you select the operation mode and the
promotional images function.
(Template) tab
Lets you load and delete templates and enter text to be
added to images.
(Print) tab
Lets you select the order numbering format and the
date format.
The print position adjustment can also be performed
from this tab.
(Print color) tab
Lets you adjust the print quality.
(Pricing) tab
Lets you set the currency to use and the price of prints.
Notes
