Sony UP-971AD, Инструкция по эксплуатации

Страница: 34 / 46

O
per
a
tio
n
Storing Image Data on a USB Flash Drive (UP-991AD only)
34
Storing Image Data on a
USB Flash Drive (UP-
991AD only)
Warning
Using this unit for medical purposes
This connector is not isolated.
Do not connect any device other than a USB Flash Drive
powered exclusively by the electric supply from the unit.
When a device that uses an alternating current is
connected, current leakage may result in an electric
shock to the patient or operator.
When a USB Flash Drive is inserted into the USB
memory terminal on the front of the printer, on-screen
image data (which was captured) is stored as bitmap
(BMP) image data on the USB Flash Drive when you
print the captured image data.
You can view image data stored in the USB Flash Drive
via a personal computer equipped with a USB port.
Folder which the image is saved into
The image file will be saved into the \\SONY\UP-
991AD\SN.[Serial Number of this device] folder on the
USB flash drive. If the folder does not exist, it will be
created.
File name of the image
Each time you print image data captured by pressing the
PRINT button, the image data is stored as BMP image
data, with a name assigned, in order, from UP_000001
to UP_999999. In the case of multi-picture, each image
is stored as one file. Image data printed once is not
stored again.
A time stamp is also added to the file.
To make printouts with the correct date
The day and time setting is necessary.
For detailed information, see “CONFIG” “-CLOCK” on
page 24.
Storing Image Data on a USB Flash
Drive
Note
Using a USB Flash Drive manufactured by Sony
Corporation is highly recommended to guarantee the
storing function.
Use USB flash drives of a size that allows for insertion
into the USB flash drive terminal.
(USB Flash Drive dimensions: height of 1 cm or less,
width of 2.1 cm or less, and length of 3 cm or more)
1
Connect the unit to a video device or computer
(page 17)
Turn on the unit.
2
Insert the USB Flash Drive into the USB memory
terminal.
3
When you want to save the video image data, set the
“STR:PRNT” in the “VIDEO” - “-STR.KEY”
menu.
4
Print the video image (page 28), or the digital
image from a computer (page 31).
The printer starts printing.
At the same time, the image data is stored in the
USB Flash Drive. While it is being written in the
USB Flash Drive, the green access lamp is lit.
When writing is completed, the access lamp goes
off.
To store video image data to a USB Flash Drive
without printing
Set “STR:CAPT” in the “VIDEO”-“STR.KEY” menu.
Connect the unit to a video device and press the
CAPTURE button while the video signal is input, and
the image data is written to the USB Flash Drive.
“STORING” is displayed on the LCD.
However, you cannot store the digital image data from a
computer without printing.