Sony UP-960, Руководство по обслуживанию

Страница: 9 / 94

1-3
UP-960(UC) UP-960CE(CE)
32
Introduction
Overview
The UP-960/960CE is a monochrome video graphic printer that reproduces images
from video equipment. Large size picture can be printed out quickly and easily
using the following features:
Clear and stable print quality
• High definition, 6.4 dots/mm printing
• 256 gradations of black and white.
• Stable printouts by the temperature compensation technology
• High density printouts using the UPP-210HD printing paper.
Two ways printing direction and two printing size selectable
• The printing direction selector on the front panel enables you to print in vertical
and horizontal directions.
• The printing size control on the front panel enables you to select two kinds of
printing size.
DIP switches to optimize the printer
• You can make printouts with bottom end first or upper part of the screen first by
using the DIRECTION DIP switch.
• Aspect ratio of printouts can be set to 4:3 or 1:1 by using the ASPECT DIP
switch.
• You can change the range to be printed out by using the SCAN DIP switch.
Fast printing
• You can make a single printout in about 10 seconds
• You can make a maximum of 11 copies of the same image continuously.
Automatic video signal discrimination
The type of input video signal (EIA or CCIR) is automatically discriminated and
printed adequately; there is no need to change any switch manually.
Easy and quick paper loading
You can load paper just by opening the door panel with the OPEN/CLOSE button
and placing the paper roll.
Introduction
33
Notes
• Turn off the power to each device before making any connections.
• Connect the AC power cord last.
• Before making connections, see “Important safeguards/notices for use in the
medical environment” on page 30.
Preparation
Connection
RM-91 remote control
unit (not supllied)
a)
Preparation
FS-20 foot switch
(not supllied)
a)
to REMOTE
to video output connector
Supplied coaxial connecting
cable (BNC
˜ BNC)
to VIDEO IN
Color/black and white
video monitor
Connecting cable
(not supplied)
to video input
connector
to VIDEO OUT
to AC IN
Supplied AC power cord
to wall outlet a) Connect either the RM-91 remote control
unit or the FS-20 foot switch.
or
REMOTE
AC IN
VIDEO
IN OUT
Video equipment/
Medical equipment