Sony UP-27MD Скачать руководство пользователя страница 75

Страница: 75 / 90

Miscellaneous

Maintaining Printer

Functionality

In addition to the following precautions, be sure to

refer to the safety warnings and notices at the

beginning of this manual.

When “Clean Thermal Head” appears on the

video monitor or printer window display

When the printer reaches a total of 1000 prints,

“Clean Thermal Head” will appear on the video

monitor or printer window display. In this case,

perform thermal head cleaning. For details, see

“Cleaning the thermal head” (page 76).

The message appears for approximately

6 seconds after you press the



POWER switch to

turn on the printer.

The message reappears each time you turn the

printer on until cleaning has been performed.

The thermal head cleaning message can be

configured in [Head Cleaning Notify] on the

[Cleaning] tab of the [Maintenance] menu.

(page 74)

When “Clean Paper Feed Roller” appears on the

video monitor or printer window display

When the last piece of paper in the paper feed tray

is used during printing, the printer executes

automatic paper feed roller cleaning. If the

internal sensor detects more dust than expected

on the paper feed roller, “Clean Paper Feed Roller”

appears on the monitor or printer window display.

In this case, perform manual paper feed roller

cleaning. For details, see “Manual paper feed

roller cleaning” (page 77).

The message about roller cleaning appears at the

end of printing if paper feeding power is lower

than expected.

When not used for a long time

• Press the



POWER switch to turn off the

printer, and then disconnect the power cord.

• Remove the partially used paper and ink ribbon

from the printer, reseal them in their original

bags, and store them in a cool, dark location.

Before unsealing and using them again, allow

them to return to room temperature to prevent

condensation.

Printer location

Avoid placing or storing the printer in the

following locations:

• Direct sunlight

• Humid locations

• Extremely hot or cold locations

• Locations with significant vibration

• Dusty locations

• Unstable locations

For safety purposes, do not place anything on top

of the printer, such as a monitor.

Caution

To prevent internal heat built-up, maintain

sufficient space around the printer (at least 10 cm

(4 in.)). Do not obstruct the ventilation holes on

the sides of the printer.

Transportation

When transporting the printer, follow the steps

below to remove all accessories and repack the

unit in its original packaging. Transporting the

printer with the accessories installed may damage

the printer.

Remove the ink ribbon (page 18) and paper

feed tray (page 20).

Lock the internal thermal head.



Press the



POWER switch to turn on the

printer, and wait for “Set Ribbon and

Paper” to appear on the printer window

display.



Simultaneously press





and the

MENU button.

The printer operation sound continues for

approximately 4 seconds, and the

message “PLEASE WAIT” appears on the

printer window display.



When the printer operation sound stops

and the message “TRANSPORT MODE”

appears in the display, press the



POWER switch to turn off the printer.

The thermal head is locked.

Notes

• If “Remove Ribbon” appears on the printer

window display, remove the ink ribbon and

perform the procedure again.

• If controls are locked, they will be released when

the printer is set to TRANSPORT MODE.

Содержание UP-27MD



























































































Результаты поиска

Содержание UP-27MD

Отзывы:

Похожие инструкции для UP-27MD

Бренды по названию

Популярные бренды

Sony UP-27MD, Инструкция по эксплуатации

Результаты поиска

Содержание UP-27MD

Отзывы:

Похожие инструкции для UP-27MD

Бренды по названию

Популярные бренды