Sony UP-27MD Скачать руководство пользователя

Страница: 18 / 90

Loading the Ink

Ribbon

Note

When using the printer for the first time, the

thermal head may be set to its transport position.

Be sure to turn on the printer and release the

thermal head from its transport position before

removing the ribbon tray. Do not open the ribbon

door panel if “Please Wait” appears on the printer

window display.

Open the ribbon door panel.

Pull the ribbon tray straight out of the printer.

Load the ink ribbon.



Align the two pegs on each side of the ink

ribbon with the slots on the ribbon tray.

Notes

• Make sure to load the ink ribbon with the

front and back oriented correctly.

• Before loading the ink ribbon, make sure to

position the start mark as shown in the

illustration and remove any slack by turning

the gear in the direction of the arrow.



Slide the ink ribbon straight into the

ribbon tray until completely inserted.

Correct

Incorrect

Gear

Start mark

Содержание UP-27MD



























































































Результаты поиска

Содержание UP-27MD

Отзывы:

Похожие инструкции для UP-27MD

Бренды по названию

Популярные бренды

Sony UP-27MD, Инструкция по эксплуатации

Результаты поиска

Содержание UP-27MD

Отзывы:

Похожие инструкции для UP-27MD

Бренды по названию

Популярные бренды