Sony UBP-X1000ES, Руководство по эксплуатации

Страница: 28 / 44

28
Bluetooth connection cannot be done/
completed.
• Set [Bluetooth Mode] to [On] (page 21).
• Make sure the Bluetooth device is turned on
and the Bluetooth function is enabled.
• Move the Bluetooth device closer to the
player.
• Connect the player and the Bluetooth
device again. You may need to cancel the
connection with the player using your
Bluetooth device first.
• Delete pairing information once from the
device list and connected device, before
retrying connection.
• Connection may not be possible if other
Bluetooth devices are present around the
player. In this case, turn off the other
Bluetooth devices.
• The connection registration information has
been erased. Perform the connection
operation again.
There is no sound, the sound skips or
fluctuates, or the connection is lost.
• DVD AUDIO cannot be played via Bluetooth
device due to DRM.
• Move the Bluetooth device closer to the
player.
• Make sure the player is not receiving any
interference from a Wi-Fi network, other
Bluetooth device, other 2.4 GHz wireless
device, or microwave oven.
• Check that the Bluetooth connection is
properly made between the player and the
Bluetooth device.
• Connect the player and the Bluetooth
device again.
• Keep the player away from metal objects or
surfaces.
The [Control for HDMI] function does not
work (BRAVIA Sync).
• Check that your TV is connected via the
HDMI OUT 1 jack.
• Check that [Control for HDMI] in [HDMI
Settings] is set to [On] (page 23).
• If you change the HDMI connection, turn the
player off and on again.
• If power failure occurs, set [Control for
HDMI] in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to [On]
(page 23).
• Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for HDMI]
function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
• When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the mains
lead, or a power failure occurs, try the
following:
1
Switch the input selector
of the AV amplifier (receiver) so that
the picture from the player appears on
the TV screen.
2
Set [Control for HDMI]
in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to
[On] (page 23). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
The System Power-Off function does not
work (BRAVIA Sync).
• Check that [Control for HDMI] and [Linked to
TV-off] in [HDMI Settings] are set to [On] and
[Valid] (page 23).
Bluetooth connection Control for HDMI (BRAVIA Sync)
GB