© 2010 Sony Electronics Inc. All rights reserved.
We recommend this hookup to view cable or satellite service on your TV and for playing BDs or
DVDs. This connection should be used if your TV, DVD / BD player, and set-top box all have
component video jacks. This connection is most commonly used for high-definition
programming.
(2) Component (Y/Pb/Pr) video cables
(2) Composite audio cables
1. Connect the coaxial cable from the
wall
to the
RF IN
jack on the
set-top box
.
Note
: If your satellite service does not include local channels, you may want to connect an
antenna to the TV IN jack on your satellite receiver. Refer to the operating instructions for specific
information on switching between satellite and local broadcasts.
1.
2. Connect a component video cable and a composite audio cable to:
a.
COMPONENT LINE OUT
and
AUDIO OUT
jacks on the
set-top box
b.
COMPONENT VIDEO IN
and
AUDIO IN
jacks on the
TV
Note
: Be sure to match the colors of the cable connectors with the colors of the jacks.
2.
3. Connect a second component video cable and a composite audio cable to:
a.
COMPONENT LINE OUT
and
AUDIO OUT
jacks on
DVD / BD
player
b.
COMPONENT VIDEO IN
and
AUDIO IN
jacks on the
TV
1. Turn on the TV.
2. Turn on the set-top box.
3. Tune the TV to the component video input to which the set-top box is connected, for
example,
VIDEO 5
.
If there is picture and sound on the TV, you have connected the set-top box correctly.
13
