Sony TRINITRON KV-T21MN8, Руководство по обслуживанию

Страница: 8 / 38

– 8 –
KV
-T21MN8/T21MN81
RM-870
11 -EN
Operations
Viewing Teletext
11
-EN
p
KV-T21MN81 only
Displaying Teletext
1
Select a TV channel which carries the Teletext
broadcast you want to watch.
2
Press TEXT to display the Teletext.
A Teletext page is displayed (normally the index
page). If there is no Teletext broadcast, 100 is
displayed at the top left corner of the screen.
To cancel the Teletext display, press TV.
Superimposing a Teletext page on the TV
picture
Press TEXT.
Each time you press TEXT, the screen changes as
follows:
z
Teletext
z
Teletext and TV
z
TV
Checking the contents of a Teletext service
(INDEX)
Press WAKE UP/INDEX to display an overview of the
Teletext contents and page numbers.
DISPLAY/REVEAL
TEXT
TEXT CLR
WAKE UP/INDEX
VIDEO/HOLD
TV
Number
FASTEXT
Using FASTEXT
This feature allows you to quickly access a Teletext
page that uses FASTEXT. When a FASTEXT page is
broadcasted, a color-coded menu appears at the bottom
of the screen. The colors of the menu correspond to the
RED, GREEN, YELLOW, and CYAN buttons on the
remote commander.
Press the color button which corresponds to the color-
coded menu.
The page is displayed after a few seconds.
Selecting a Teletext page
To input the three-digit page number of the Teletext
page, press the number buttons.
If you make a mistake, key in the correct page number
again.
To access the next or previous page, press PROGR +/–.
Holding a Teletext page (subpage)
Press VIDEO/HOLD.
The HOLD symbol “
˝
” is displayed at the top left
corner of the screen.
To resume normal Teletext operation, press VIDEO/
HOLD again or TEXT.
Revealing concealed information
Press DISPLAY/REVEAL.
To conceal the information, press DISPLAY/REVEAL
again.
Enlarging the Teletext display
Press A/B/ENLARGE.
Each time you press A/B/ENLARGE, the Teletext
display changes as follows:
z z z
Normal size
Waiting for a Teletext page while watching a
TV program (TEXT CLEAR)
1
Key in the page number of the Teletext that you
want to refer, then press TEXT CLR.
2
When the page number is displayed on the screen,
press TEXT to switch the Teletext on.
Enlarge
lower half Enlarge
upper half
PROGR +/–
A/B/ENLARGE
Operations
10 -EN
Selecting a stereo or
bilingual program
Press A/B/ENLARGE repeatedly until you
receive the sound you want.
The on-screen display changes corresponding to the
selected sound and the WAKE UP/STEREO indicator
also lights up.
When receiving a NICAM program
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
When receiving a A2 (German) program
Broadcasting
A2 (German)
stereo
A2 (German)
bilingual
Receiving area for NICAM and A2 (German)
programs
System
NICAM
A2 (German)
Notes
•
If the signal is very weak, the sound becomes monaural
automatically.
•
If the stereo sound is noisy, select “regular sound.” The sound
becomes monaural, however, the noise will be reduced.
Receiving area
Hong Kong, Singapore, New Zealand,
etc.
Australia, Malaysia, Thailand, etc.
On-screen display
(Selected sound)
On-screen display
(Selected sound)
NICAM
z
MONO
(Regular sound)
NICAM
z
MONO
(Regular
sound)
NICAM
z
MAIN
(Main sound)
NICAM
z
SUB
(Sub sound)
NICAM
z MAIN
(Main sound)
NICAM
z MONO
(Regular sound)
STEREO
z
MAIN
(Main sound)
STEREO
z
SUB
(Sub sound)
STEREO
(Stereo sound)
ENLARGE
A/B
NICAM
z
(Stereo sound)