Sony TRINITRON KV-T21MN8, Руководство по обслуживанию

Страница: 6 / 38

– 6 –
KV
-T21MN8/T21MN81
RM-870
7 -EN
Operations
Watching the TV Switching off the TV
To switch off the TV temporarily, press POWER on the
remote commander.
To switch off the TV completely, press POWER on the
TV.
If the power on the TV is turned off in standby mode,
the STANDBY indicator may remain alight for a while.
Watching the video input
Press VIDEO/HOLD.
1
Press POWER to turn the TV on.
To scan through channels
Press PROGR +/– until the channel you want
appears.
3
Press VOL +/– to adjust the volume.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
2
Select the TV channel you want to watch.
To select a channel directly
Press a number button.
To select a two-digit channel, press “-/- -” before
the number buttons.
For example: to select channel 25, press “-/- -,” and
then “2” and “5.”
1 2 3
4 6
7 8 9
÷
0
5
÷
2 5
PROGR
VOL
POWER
Operations
HOLD
VIDEO
VIDEO 1
POWER
POWER
To watch TV, press TV.
Muting the sound
Press MUTING.
MUTING
MUTING
TV
Getting Started
6 -EN
MANUAL PROGR COLOR SYSTEM SELECT TV SYSTEM AUTO PROGR
POWER
Presetting channels
Presetting channels automatically
You can preset up to 80 TV channels in numerical
sequence from program position 1.
Front of TV
1
Press POWER.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
2
Press TV SYSTEM until your local TV system
appears.
3
Press AUTO PROGR.
To start presetting channels automatically
from the specified program position
1
Press MANUAL PROGR.
2 Press TV SYSTEM to select your local TV system.
3
Press PROGR +/– to select the program position.
4 Press AUTO PROGR.
Presetting channels manually
To change the channel for a particular program
position or to receive a channel with a weak signal,
preset the channel manually.
1
Press MANUAL PROGR.
2
Press PROGR +/– until the required program
position appears on the screen.
3
Press TV SYSTEM until your local TV system
appears.
4
Press /– on the TV until the
required channel picture appears on the
screen.
5
Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
1 Press PROGR +/– to select the program position.
2 Press TV SYSTEM until the picture and sound
become normal.
Notes
•
If you do not know your local TV system, consult your nearest
authorized service center or dealer.
•
The setting of the TV SYSTEM is memorized for each program
position.
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1
Press PROGR +/– until the unused or
unwanted program position appears on the
screen.
2
Press MANUAL PROGR.
3
Press PIC MODE on the remote commander.
4
Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
1
3 2
TV SYSTEM
AUTO PROGR
1 2 3 1
POWER
B/G I D/K M