7
Using Your New TV
Using Y
our New TV
Connect
To (on the DVD player)
Y (green)
Y
C
B
(blue)
C
b
, B-Y or P
B
C
R
(red)
C
r
, R-Y or P
R
Note
• If you select “DVD” on your TV screen, no signal will be output at the
MONITOR OUT jacks (see page 11).
Connecting a DVD player using the COMPONENT VIDEO
(DVD) IN jacks
1 Using an audio cable, connect R and L under the COMPONENT VIDEO (DVD) IN
jacks on your TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
2 Using a component video cable, connect Y, C
B
, and C
R
under the COMPONENT
VIDEO (DVD) IN jacks on your TV to the COMPONENT VIDEO OUT Y, C
B
, and
C
R
output connectors on your DVD player.
3 Press VIDEO on the remote or TV/VIDEO on the TV until “DVD” appears on the
screen.
To component
video output
Component video cable
(not supplied)
DVD player
To
L (white)
R (red)
To audio
output
Audio cable
(not supplied)
: Signal flow
To COMPONENT VIDEO
(DVD) IN input
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
C
B
C
R
COMPONENT VIDEO(DVD) IN
Notes
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to COMPONENT VIDEO
(DVD) IN input on your TV. Your TV can receive either 525i/60Hz or
625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
• When connecting to the COMPONENT VIDEO (DVD) IN jacks on your
TV, you must connect Y, C
B
, and C
R
to receive the video signals, and
connect L and R to receive analog audio signals.
Rear of TV
continued
