– 89 –
KV-ES34M61/ES34N90
RM-916
RM-958
5-5. A BOARD ADJUSTMENT AFTER IC003
(MEMORY) REPLACEMENT
When replacing IC003 and IC004 (MEMORY), be sure to change
IC001 (µ-COM) to the following at the same time.
1. Enter to Service Mode.
2. Press commander buttons
5
and
-
(Data Initialize), and
2
and
-
(Data Copy) to initialize the data.
3. Call each item number and check if the respective screen shows
the normal picture.
In cases where items are not well adjusted, rectify the items
with fine adjustment.
Write the data per each item number (
[MUTING]
+
-
).
4. Select item numbers “OPB0” (OP1), “OPB1” (OP2) and
respectively set the bit per model with command buttons
3
and
6
.
5. Press commander buttons
8
and
-
(Test Normal) to return
to the data that was set on the shipment from the factory.
(This will also cancel Service Mode.)
KV-ES34M61
CXP750096-013Q
KV-ES34N90
CXP750096-018Q
MODEL
IC001 (µ-CON)
Содержание Trinitron KV-ES34M61
Страница 67: ... 91 KV ES34M61 ES34N90 RM 916 RM 958 MEMO ...
Страница 68: ... 92 KV ES34M61 ES34N90 RM 916 RM 958 MEMO ...
Страница 69: ... 93 KV ES34M61 ES34N90 RM 916 RM 958 MEMO ...
Страница 70: ... 94 KV ES34M61 ES34N90 RM 916 RM 958 MEMO ...
