– 48 –
KV-DZ29M50
RM-GA002
Service Item
DEF 1 : 000 VPOS V POSITION
001 VSIZ
V SIZE
002 VLN
V LINEARITY
003 VSCO S CORRECTION
005 HTPZ
H TRAPEZOID
DEF 2 : 000 HPOS H POSITION
001 HSIZ
H SIZE
002 PIN
PIN AMP
003 UCP
UPPER CORNER PIN
004 LCP
LOWER CORNER PIN
006 VANG AFC ANGLE
007 VBOW AFC BOW
7. Write into the memory by pressing
[MUTING]
then
-
on
the remote commander.
FOR 16:9 MODE, PROGRESSIVE (50Hz)
8. Adjust condition change to WIDE MODE : 16:9.
Service Item
DEF 1 : 006 ASPT VASPECT
007 SCRL VSCROLL
DEF 2 : 015 PINO
PIN AMP OFFSET
016 UCPO UPPER CORNER PIN OFFSET
017 LCPO LOWER CORNER PIN OFFSET
FOR PROGRESSIVE (60Hz) MODE
9. Input 525/60Hz signal.
10. Set to WIDE MODE : 4:3
FOR 16:9 MODE, PROGRESSIVE (60Hz)
11. Set to WIDE MODE : 16:9
12. Adjust the following items to obtain optimum image.
Raise/lower the data with the
3
and
6
buttons.
DEF 1 : 006 ASPT
VASPECT
007 SCRL
VSCROLL
DEF2 : 015 PINO
PIN AMP OFFSET
016 UCPO UPPER CORNER PIN OFFSET
017 LCPO LOWER CORNER PIN OFFSET
13. Input a NTSC cross hatch/dot signal and repeat all
above steps.
5-4(3).480i INPUT / 576i INPUT
(i) SUB CONTRAST
Input Signal :
576i 100% Color Bar to HD / DVD1
Picture: CUSTOM mode
Condition :
MCP
002
RON 0
005 RGBL 3
003
GON 0
006 YLMT 2
004
BON 1
SADJ 001
PIOF 0
Under Picture Menu :
Picture
100
Color
0
Adjusting parameter : MCP 011
SPIC
(Same table for 480i/576i)
(ii) SUB COLOR & SUB HUE ADJUSTMENT
Input Signal : 480i 75% Color Bar or 576i 100% Color
Bar to
HD/DVD1
Picture: CUSTOM mode
Condition :
MCP
002
RON 1
005 RGBL 0
003
GON 1
006 YLMT 3
004
BON 1
Under Picture Menu :
Picture
50
Color
50
Adjusting parameter : MCP 012
COLR
(AD2STEPS)
014
HUE
(Same table for 480i/576i)
VB1- VB2 =
∆
VB = 2.72 ± 0.07 Vp-p (For 576i 100% color bar)
5-5. DEFLECTION ADJUSTMENTS
FOR PROGRESSIVE (50Hz)
1. Set to Service Mode.
2. Input a PAL cross hatch/dot signal.
3. Set the following condition.
Picture Mode to
[VIVID]
, Picture Rotation to
[+/-0]
and
Eco Mode to OFF.
4. Set SCAN MODE: PROGRESSIVE.
5. Using the
1
and
4
button, select category DEF 1
(Service Mode).
6. Select and adjust the following items to obtain optimum
image. Raise/lower the data using the
3
and
6
buttons.
VB1
VB2
GND
VB1 VB2 VB3
VB4
For sub Hue
adjustment