27
Additional Information
Snowy picture
Noisy sound
Distorted picture
Noisy sound
No picture
No sound
Possible cause
Symptom
Solutions
Page
25
–
24
–
–
25
9
8
RESET
SLEEP
TV
WAKE UP
RESET
x
Troubleshooting
If you have any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.
Reset function
Press the RESET button on your remote control.
Your TV will go blank for about half a second
then the picture will reappear with “RESET”
displayed on your TV screen for about 10 seconds.
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
Troubleshooting guide
• The connection is loose
or the cable is
damaged.
• The antenna setup is
inappropriate.
• Channel presetting is
inappropriate or
incomplete.
• Signal transmission is
low.
• Broadcast signals are
too strong.
• The power cord,
antenna or VCR is not
connected.
• The TV is not turned
on.
• Check the antenna cable and connection
on the TV, VCR and at the wall.
• Check the antenna setup.
Contact a Sony dealer for advice.
• Preset the channel again.
• Try using a booster.
• Turn off or disconnect the booster if it is in
use.
• Check the power cord, antenna and VCR
connections.
• Press POWER.
• Press
!
(main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
continue