Sony Trinitron KV-29LS40K, Руководство по эксплуатации

Страница: 13 / 124

13
Level 1 Level 2 Level 3 / Function
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the “Set
Up” menu allows you to:
a) Preset channels or the VCR channel one by one to
the programme order of your choice. To do this:
1 After selecting the ”Manual Programme Preset”
option, press
b
then with Programme option
highlighted press b . Press v or V to select on
which programme number you want to preset the
channel (for VCR, select programme number “0”).
Then press
B
.
2 The following option is only available depending on the country you have selected in the “Language /
Country” menu.
After selecting the System option, press b . Then press v or V to select the TV Broadcast system ( B/G for
western European countries or D/K for eastern European countries). Then press B .
3 After selecting the Channel option, press b . Then press v or V to select the channel tuning (“ C ” for terrestrial
channel or “ S ” for cable channels). Next press b . After that, press the number buttons to enter directly the
channel number of the TV broadcast or the channel of the VCR signal. If you do not know the channel
number, press
v
or
V
to search for it. When you tune the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number
with the channel you wish to name. When the programme you want to name appears on the screen, select
the
Label option and press
b
. Next press
v
or
V
to select a letter, number or “-“ for a blank. Press
b
to confirm
this character. Select the other four characters in the same way. After selecting all the characters, press OK
twice to store.
c) Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine
tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press
b
. Next press
v
or
V
to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number
you want to skip. When the programme you want to skip appears on the screen, select the Skip option and
press b . Next press v or V to select Yes . Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e) This option allows you to view and record scrambled channels when using a decoder connected to the Scart
2 / directly or through a VCR.
This option is only available depending on the country you have selected in the ‘Language/Country’
menu.
To do this: select the Decoder option and press b . Next press v or V to select On . Finally press OK twice
to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
LanguageCountry
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
S
Menu System
continued...
KV29LS40K GB.fm Page 13 Monday, February 2, 2004 9:42 AM