Sony Trinitron KV-28DX30U, Руководство по эксплуатации

Страница: 35 / 40

31
RM-888
MENU
PROGR
OK
Optional Equipment
Connecting equipment to the TV
Selecting the output source for the scart
socket
or
1. Press the MENU button on the remote control to display the
menu on the TV screen.
2. Press the
V
or
v
buttons to select the symbol on the menu
screen then press the
b
button to enter the ‘VIDEO
CONNECTION’ menu screen.
3. Press the
V
or
v
buttons to highlight ‘TV Screen’ (input source
for the TV screen) or ‘Output’ (output source for / or
socket) then press the
b
button to confirm.
4. Press the
B
or
b
button to select the desired source (see below)
then press the OK button to confirm:
Note: When Auto is selected as the output source, then the signal
being viewed on the TV will also be output to AV2.
5. Press the MENU button to remove the menu from the TV screen.
Smartlink
Smartlink is a direct link between your TV set and VCR.
For Smartlink you need:
•
a VCR which supports Smartlink, NexTView Link or
Megalogic.
• A fully-wired 21-pin scart cable to connect your VCR to scart
connector .
The features of Smartlink are:
•
tuning information such as the channel overview are
downloaded from the TV set to the VCR.
• direct TV recording: While watching TV you need to press just
one button on the VCR to record this programme.
For more information on Smartlink please refer to your VCR
instruction manual.
TV Screen TV, AV1, RGB, AV2, YC2, AV3
Output TV, AV1, AV2, YC2, AV3, AUTO
G
H
2
s 2
3
3
TV
AV1
TV Screen
Output [TV - - - - -]
[AV 1 - - - - -]
VIDEO CONNECTION