Sony Trinitron KV-28DS20U, Инструкция по эксплуатации

Страница: 27 / 38

25
Additional TV Features
Names for channels are usually taken automatically from Teletext if available. You can however name a channel or an input video
source using up to five characters (letters or numbers).
Naming a channel (Analogue channels only)
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the
v
button to select the symbol on the menu
screen then press the
b
button to enter the ‘PRESET’
menu.
3. Press the
v
button to select ‘Manual Programme Preset’
then press the
b
button to enter the ‘MANUAL
PROGRAMME PRESET’ menu.
4. Press the
V
or
v
buttons to select the channel you wish
to name.
5. Press the
b
button repeatedly until the first element of
the ‘LABEL’ column is highlighted.
6. Press the
V
or
v
buttons to select a letter or number
(select ‘-’ for a blank) then press the
b
button to
confirm. Select the other four characters in the same
way.
7. After selecting all the characters, press the OK button.
8. Repeat steps 4 to 7 if you wish to label other channels.
9. Press the MENU button to remove the menu from the
TV screen.