Basic Operation
Basic Operation
7
Overview of the remote control
VIDEO
/
TV
/
DIGITAL
VIDEO
button
Press to switch off your VCR or DVD
temporarily.
DIGITAL/
button
Press to switch between Digital or
analogue mode, or to return to normal TV
operation from Teletext.
Screen format button
Press repeatedly to change the screen
format.
0 - 9 buttons
When Media Selector is set to VCR or TV,
press to input the required channel
number. For double digit numbers, e.g. for
programme 14, press 1 followed by 4.
Information
/Reveal
button
In TV Mode:
In Digital mode, press to
display the INFO screen. In analogue
mode, press to reveal on screen
information such as channel number etc.
In Teletext Mode:
Press to reveal
concealed information (e.g. answers to a
quiz). Press again to cancel.
Coloured buttons
These buttons are used for Teletext and for
Digital menus. Please refer to the relevant
sections in this manual.
EPG button
In Digital mode, press this button to display
the Electronic Programme Guide.
Control pad
When in the TV menu system, use these
buttons to navigate through the options in
each display.
Note:
You can only enter the TV menu
system if the Media Select button is set to
TV. When set to VCR or DVD the control
pad buttons operate the main functions of
your VCR or DVD.
MENU button
Press to enter the menu system of this TV.
and - buttons
Press to increase (+) or decrease (-) the
volume.
/
TV
button
Press to switch off your TV temporarily. The
standby indicator on the front of the TV is lit.
Press again to return to normal operation.
Video Input
/Hold
button
In TV Mode:
Press to select signals from
equipment connected to the TV sockets
(refer to ‘Connecting additional
equipment’).
In Teletext Mode:
Press to hold the current
page. Press again to cancel.
Previous channel/Exit button
In TV Mode:
Press to return to the previous
channel you were watching (provided you
watched it for at least 5 seconds).
Note:
If the Media Select button is set to
VCR, you can use this button to select
double digit programme numbers on your
VCR, e.g. press the
button then press 2
and 3 for 23.
In Digital Teletext Mode:
When instructed
on-screen, press to cancel a selection.
Analogue Teletext button
In analogue mode, press to switch
analogue Teletext on or off.
REC button
When Media Select switch is set to VCR,
press this button to begin recording.
Media Select button VCR/TV/DVD
This remote can also operate Sony DVDs
and most Sony VCRs. Press this button to
select which type of equipment you want to
use. A green light is lit momentarily to show
which one you have selected.
Note:
Before operating your VCR or DVD
you will need to enter the correct
configuration code. Please refer to the
‘Remote control configuration’ section of
this instruction manual.
PROG + and - buttons
In TV Mode:
Press to display the next or
previous channel.
In Teletext Mode:
Press to select the next
or previous Teletext page.
Mute button
Press to mute the TV sound. Press again to
restore the sound.
/
DX100 Pages 1-10.fm Page 7 Tuesday, September 18, 2001 11:12 AM
