13
US
TMR-BT10A_U2 [US,ES] 3-280-223-11(1)
Check the following before
operating the unit.
– Pairing of this unit and the
Bluetooth receiving device is
complete.
– The Bluetooth receiving device is
on standby for connection.
– The Bluetooth receiving device
supports the receiving music
function (profile: A2DP*).
1
Connect the stereo mini
plug of this unit to the
headphone jack of a
stereo audio source
device.
Note
When connecting to a stereo audio
source device, be sure to connect
this unit to the headphone jack, not
to the LINE OUT jack.
Listening to music
2
Turn on the stereo
audio source device.
3
Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice, then the unit is turned on.
After the unit is turned on, it
connects to the Bluetooth
receiving device automatically.
Notes
• Do not press and hold the
POWER button for more than 7
seconds, otherwise pairing mode
is entered.
• Make sure to turn on only the
Bluetooth receiving device you
want to connect with this unit. If
many Bluetooth receiving
devices are turned on, the
connection may not be done as
you desire.
• If this unit cannot make the
Bluetooth connection with a
paired device, pair the device
again, or try making the
Bluetooth connection from the
Bluetooth receiving device if
possible.
Tips
• While searching a Bluetooth
receiving device, the indicator
(blue) keeps flashing.
OPERATING THE UNIT
POWER
button
Continued
01U2.p65
8/8/07, 1:27 pm
13
