manualshive.com logo in svg

Sony Tektronix WFM 1125, Руководство пользователя

Поделиться
Скачать
Sony Tektronix WFM 1125 Скачать руководство пользователя страница 11

WFM 1125 Option 0A/0B/0C/0D User Manual

 v

General SafetySummary

Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it. To avoid potential hazards, use this
product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the system. Read
the General Safety Summary in other system manuals for warnings and cautions
related to operating the system.

Use Proper Power Cord.

 Use only the power cord specified for this product and

certified for the country of use.

Ground the Product.

 This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings.

 To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings
information before making connections to the product.

Do Not Operate Without Covers.

 Do not operate this product with covers or panels

removed.

Avoid Exposed Circuitry.

 Do not touch exposed connections and components

when power is present.

Do Not Operate With Suspected Failures.

 If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Provide Proper Ventilation.

 Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

Do Not Operate around Conductive Pollutants.

To Avoid Fire or

Personal Injury

Содержание Tektronix WFM 1125











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды