3
TDM-iP1
SECTION 1
GENERAL
1
DIGITAL MEDIA PORT cable
2
LED status indicator
iPod Display mode : Lights up in amber.
On Screen Display mode : Lights up in green.
3
OPR MODE button
4
iPod connector
5
Rear support
6
VIDEO OUT jack
VIDEO
OUT
SECTION 2
TEST MODE
thin rod
TEST MODE button (inside)
OPR MODE button
(bottom side)
(upper side)
[TEST MODE]
How of test mode to enter
1. Conect the video monitor to VIDEO OUT terminal of this unit.
2. Conect this unit to DMPORT of audio set, and the power on.
3.An upper OPR MODE button is pushed while pushing the TEST button on the back of this unit with the thin rod etc.
Item of test mode
Whenever the OPR MODE button is pushed, the following test mode item divides the change cyclic.
1. Version display of microprocessor (LED blinks once).
2. The adjustment mode (The image is output to iPod) (LED blinks twice).
3. The color bar (Approach to the standard) (LED blinks three times).
4. Gray image (LED blinks four times).
5. FFFF display (meaningless).
To come off the test mode
An upper OPR MODE button is pushed while pushing the TEST button on the back of this unit with the thin rod etc.
LIST OF PARTS LOCATIONS
This section is extracted
from instruction manual.