Sony TA-ZH1ES, Руководство по обслуживанию, Страница: 15 / 108

TA-ZH1ES
15
2-16. AC INLET (AC1)-1
• Continued on 2-17 (page 16).
Note 3: During reassembly, use new cable ties
to fasten the cables back in place as
they were before disassembly.
front side
rear side
bottom side
AC inlet
1
Cut the cable tie.
2
AC inlet cable connector
(CN102)
rear side
rear side
‡$&LQOHWFDEOHVHWWLQJ
– 7RSYLHZ –
OK NG
terminal
terminal
AC inlet
AC inlet
guide line
C113
DIGITAL board
CN102
CN102
AC inlet terminals
AC inlet terminals
shield (inlet) hole
shield (inlet) hole
The cables are in
between the AC
inlet terminals.
The cables are outside
of the AC inlet terminals.
The cables are not visible
when looking at the shield
(inlet) hole from the top.
The cables are visible when
looking at the shield (inlet)
hole from the top.
1 Pass through between the
terminals of the AC inlet.
2 Insert into the
connector
(CN102).
3
Secure with
a cable tie.
4 Push in between
C113 and CN102.
Note 2: The shield (inlet) has been deleted in the middle of production.
Note 1:
The color of the AC inlet cable has been changed in the middle
of production. The cable color of the former type is used here.