Sony SX-C700A, Руководство по эксплуатации, Страница: 9 / 24

9
5
Level meter
Indicates the output level of the audio signal selected
by the MONITOR channel selector
4 . When the
MONITOR channel selector is set to ORIGINAL, the
level meter also indicates the level of the original
sound output to the LINE OUT
qs , AUDIO IN/OUT
qd , and INTERPRETER’S UNIT qg connectors.
6
ORIGINAL volume controls
Used to adjust the level of the following sound.
D/C UNIT SP volume control: Adjusts the level of
the audio signal output to the chairman’s unit/
delegate’s unit.
D/C UNIT MIC volume control: Adjusts the input
level of the audio signal sent from the microphones
on the chairman’s units and delegate’s units.
MIC/LINE 1 volume control: Adjusts the input level
of the signal input through the EXT IN-1 MIC or
LINE connector.
MIC/LINE 2 volume control: Adjusts the input level
of the signal input through the EXT IN-2 MIC or
LINE connector.
When the MIC/LINE switch of the EXT IN-1 or EXT
IN-2 connector is set to LINE, the input level of the
signal input through the LINE connector can be
adjusted.
When the MIC/LINE switch of the EXT IN-1 or EXT
IN-2 connector is set to MIC, the input level of the
signal input through the MIC connector can be
adjusted.
7 MIC (microphone mode) LIMIT ON/OFF
button
Selects the microphone mode for the delegate’s units.
The microphone of the chairman’s unit remains live
regardless of the setting of this button.
MIC (microphone) LIMIT ON: Press this button to
set the microphone to the speaker’s number limitation
mode. The button indicator lights. Setting this mode
allows the microphones of up to five delegate’s units
to be live at the same time.
MIC (microphone) LIMIT OFF: Press the button
again to set the microphone to the speaker’s number
unlimitation mode. The button indicator goes out.
Setting this mode allows the microphones of all
delegate’s units to be live at the same time.
8
DIRECT ACCESS ON/OFF button
Not used.
9
SEAT ASSIGN START/END button
Not used.
0
EXT UNIT IN/OUT (external unit input/
output) connectors (phone jack)
Connect to the howling suppressor unit or filter unit
(not supplied).
Notes
• Be sure to connect both the IN and OUT connectors.
Connecting only one of the two connectors results in
incorrect operation of the unit.
• When it is not necessary to use the howling
suppressor or filter unit, disconnect cables from both
connectors.
qa
EXT IN-1 MIC/LINE (external 1 microphone/
line signal input) connectors and MIC/LINE
switch
EXT IN-1 MIC/LINE connectors
Accept an external audio signal.
MIC connector (XLR type): Connect a rostrum or
conference hall microphone.
Note
When you use a connecting cable with an XLR
connector, pin No.1 and the case (metal part) of
which are connected, noise may be picked up.
LINE connector (phono jack): Connect to external
equipment such as audio equipment.
MIC/LINE switch
Selects the signal input to the EXT IN-1 connector.
MIC: Set the switch to this position when a
microphone is connected.
LINE: Set the switch to this position when an item of
audio equipment is connected.