59
US
Ad
v
a
nce
d
Spe
ake
rs
Se
tting
Up
5
Press
V
/
v
repeatedly to select
the speaker pattern you want.
1
Press GUI MODE.
“GUI MODE” appears on the display and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press
V
/
v
repeatedly to select
“Settings”, then press
or
b
.
The Settings menu list appears on the TV
screen.
3
Press
V
/
v
repeatedly to select
“Speaker”, then press
or
b
.
4
Press
V
/
v
repeatedly to select
“Test Tone”, then press
or
b
.
You can select the test tone type.
5
Press
V
/
v
repeatedly to select
the speaker you want to adjust,
then press
.
The test tone is output from each speaker
in sequence.
6
Adjust the parameter using
V
/
v
,
then press
.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value is shown on the TV screen
during adjustment.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely. Check to see if they are connected
securely and cannot be disconnected by
pulling on them slightly.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker displayed on the TV
screen
The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.
Making settings with the Test
Tone menu
2CH/
A.DIRECT
A.F.D.
MOVIE
MUSIC
CLEAR
/>10
RESOLUTION
XM
MENU
RETURN/
EXIT
OPTIONS
TOOLS
HOME
DISPLAY
GUI
MODE
O
INPUT
MODE
SLEEP
NIGHT
MODE
2-6
1
MENU
