Sony STR-ZA1000ES страница 136 Скачать руководство пользователя

Страница: 136 / 187

software.

A.3 md4c.c

MD4C.C - RSA Data Security, Inc., MD4 message-digest algorithm

License to copy and use this software is granted provided that it is identified as the “RSA

Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or referencing

this software or this function.

License is also granted to make and use derivative works provided that such works are

identified as “derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all

material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of

this software or the suitability of this software for any particular purpose. It is provided “as is”

without express or implied warranty of any kind.

These notices must be retained in any copies of any part of this documentation and/or

software.

trmd5.c

License to copy and use this software is granted provided that it is identified as the “RSA

Data Security, Inc. MD5 Message- Digest Algorithm” in all material mentioning or referencing

this software or this function.

License is also granted to make and use derivative works provided that such works are

identified as “derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all

material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of

this software or the suitability of this software for any particular purpose.

It is provided “as is” without express or implied warranty of any kind.

These notices must be retained in any copies of any part of this documentation and/or

software.

trrc2.c

This package is an SSL implementation written by Eric Young ([email protected]).

The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following

conditions are aheared to.

The following conditions apply to all code found in this distribution, be it the RC4, RSA,

lhash, DES, etc., code; not just the SSL code.

The SSL documentation included with this distribution is covered by the same copyright

terms except that the holder is Tim Hudson ([email protected]).

Содержание STR-ZA1000ES




























































































































































































Результаты поиска

Содержание STR-ZA1000ES

Отзывы:

Похожие инструкции для STR-ZA1000ES

Бренды по названию

Популярные бренды

Sony STR-ZA1000ES, Руководство пользователя

Результаты поиска

Содержание STR-ZA1000ES

Отзывы:

Похожие инструкции для STR-ZA1000ES

Бренды по названию

Популярные бренды