STR-DH800
3
1.
SERVICING NOTES
............................................. 3
2. DISASSEMBLY
2-1. Disassembly Flow ........................................................... 5
2-2. Case ................................................................................. 5
2-3. Front Panel Block ........................................................... 6
2-4. Back Panel Block ............................................................ 6
2-5. DIGITAL Board .............................................................. 7
2-6. VIDEO Board ................................................................. 7
2-7. Main Block ..................................................................... 8
2-8. MAIN Board ................................................................... 8
3.
TEST MODE
............................................................ 9
4.
ELECTRICAL CHECK
......................................... 11
5. DIAGRAMS
5-1. Block Diagram - MAIN Section - ................................... 12
5-2. Block Diagram - HDMI Section - ................................... 13
5-3. Block Diagram - DSP, S-AIR, SIRIUS Section - ........... 14
5-4. Block Diagram - AUDIO Section - ................................. 15
5-5. Block
Diagram
- PANEL, POWER SUPPLY Section - ........................... 16
5-6. Printed
Wiring
Board
- DIGITAL Board (Component Side) - ........................... 18
5-7. Printed
Wiring
Board
- DIGITAL Board (Conductor Side) - ............................. 19
5-8. Schematic Diagram - DIGITAL Board (1/4) - ................ 20
5-9. Schematic Diagram - DIGITAL Board (2/4) - ................ 21
5-10. Schematic Diagram - DIGITAL Board (3/4) - ................ 22
5-11. Schematic Diagram - DIGITAL Board (4/4) - ................ 23
5-12. Printed Wiring Board - MAIN Board - ........................... 24
5-13. Schematic Diagram - MAIN Board (1/3) - ..................... 25
5-14. Schematic Diagram - MAIN Board (2/3) - ..................... 26
5-15. Schematic Diagram - MAIN Board (3/3) - ..................... 27
5-16. Printed Wiring Board - HDMI Section (1/2) - ................ 28
5-17. Printed Wiring Boards - HDMI Section (2/2) - .............. 29
5-18. Schematic Diagram - HDMI Section (1/2) - ................... 30
5-19. Schematic Diagram - HDMI Section (2/2) - ................... 31
5-20. Printed Wiring Board - DSP Board - .............................. 32
5-21. Schematic Diagram - DSP Board - ................................. 33
5-22. Printed Wiring Board - S-AIR Board - ........................... 34
5-23. Schematic Diagram - S-AIR Board - .............................. 34
5-24. Printed Wiring Board - VIDEO Board - ......................... 34
5-25. Schematic Diagram - VIDEO Board - ............................ 35
5-26. Printed Wiring Board - CONNECTION Board - ............ 36
5-27. Schematic Diagram - CONNECTION Board - .............. 37
5-28. Printed Wiring Boards - PANEL Section - ..................... 38
5-29. Schematic Diagram - PANEL Section - .......................... 39
5-30. Printed Wiring Board - STANDBY DCDC Board - ....... 40
5-31. Schematic Diagram - STANDBY DCDC Board - .......... 41
5-32. Printed Wiring Board
- THERMAL SENSOR Section - ................................... 42
5-33. Schematic Diagram
- THERMAL SENSOR Section - ................................... 42
6.
EXPLODED VIEWS
6-1. Case Section .................................................................... 61
6-2. Front Panel Section ......................................................... 62
6-3. Back Panel Section ......................................................... 63
6-4. Chassis Section ............................................................... 64
6-5. Heatsink Section ............................................................. 65
7.
ELECTRICAL PARTS LIST
.............................. 66
Accessories are given in the last of the electrical parts list.
TABLE OF CONTENTS
SECTION 1
SERVICING NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(
Caution:
Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution:
The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to
fl
ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
NOTE OF REPLACING THE IC2022 ON THE DIGITAL
BOARD
IC2022 on the DIGITAL board cannot exchange with single. When
this part on the DIGITAL board is damaged, exchange the entire
mounted board.
NOTE OF REPLACING THE IC3506 AND IC3508 ON
THE HDMI BOARD
IC3506 and IC3508 on the HDMI board cannot exchange with sin-
gle. When these parts on the HDMI board are damaged, exchange
the entire mounted board.
NOTE OF REPLACING THE IC5021 ON THE DSP
BOARD
IC5021 on the DSP board cannot exchange with single. When this
part on the DSP board is damaged, exchange the entire mounted
board.
