83
GB
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm
masterpage: Right
STR-DH720
4-262-412-
12
(1)
Ad
ditional Inf
o
rmation
• The types and the number of equipment
which can be controlled by the
“BRAVIA” Sync are restricted in the
HDMI CEC standard as follows.
– Recording equipment (Blu-ray Disc
recorder, DVD recorder, etc.): up to 3
equipment
– Playback equipment (Blu-ray Disc
player, DVD player, etc.): up to 3
equipment
– Tuner-related equipment: up to 4
equipment
– AV receiver (audio system): up to 1
equipment
The TV’s remote control cannot be
used to control the connected
equipment when using the Control for
HDMI function.
• Depending on the connected equipment
and TV, you may need to set up the
equipment and TV. Refer to the operating
instructions supplied with each equipment
and TV.
• Change the input of the receiver to the
HDMI input connected to the equipment.
If there is a malfunction, a message appears on
the display panel. You can check the condition
of the system by the message. If any problem
persists, consult your nearest Sony dealer.
PROTECT
Irregular current is output to the speakers, or
the receiver is covered and ventilation holes
are blocked. The receiver will automatically
turn off after a few seconds. Check the
speaker connection and turn on the power
again.
USB FAIL
An over current from the
(USB) port was
detected.
This receiver will automatically turn off
after a few seconds. Check the iPhone/iPod
or USB device, then unplug it and turn on
the power again.
For other messages, see “Message list after
Auto Calibration measurement” (page 38),
“iPhone/iPod message list” (page 45) and
“USB message list” (page 48).
Reference sections
Error messages
Clearing the memory
To clear
See
All memorized settings
Customized sound fields
