Sony STR-DH590, Руководство по обслуживанию

Страница: 30 / 70

STR-DH590
30
DCAC MIC TEST MODE
The auto calibration microphone input can be outputted from the
speaker.
Note: It is necessary to connect speakers to this unit.
Procedure:
1. While pressing the [MUSIC] and [DIMMER] buttons, press
the [
1
] button to turn the power on.
[
1
] press
While pressing
[MUSIC] and [DIMMER]
2. The message “MIC” appears.
3. Check that sound which is inputted from microphone is out-
putted from the speaker.
Releasing method:
Press the [
1
] button to turn the power off.
SIRCS MODE CHANGE
The command mode of the remote commander which this unit re-
ceives can be changed.
Procedure:
1. While pressing the [MUSIC] and the [PURE DIRECT] but-
tons, press the [
1
] button to turn the power on.
[
1
] press
While pressing
[MUSIC] and [PURE DIRECT]
2. Either the message “C.MODEAV1” or “C.MODEAV2” ap-
pears. Select the desired mode.
(Each time the same operation is repeated, it changes “AV1”
and “AV2” alternately)
HDMI SPECIAL MENU: MODE 1
When DTS-HD can not be outputted due to some problem, it can
be returned to EDID that supports DTS-HD.
Procedure:
1. While pressing the [TUNER − ] and the [PURE DIRECT] but-
tons, press the [
1
] button to turn the power on.
[
1
] press
While pressing
>781(5í@DQG>385(',5(&7@
2. The message “HDMI.M1 ON” appears, it return to EDID that
supports DTS-HD.
Releasing method:
1. While pressing the [TUNER − ] and the [PURE DIRECT] but-
tons, press the [
1
] button to turn the power on again.
2. The message “HDMI.M1 OFF” appears, it return to normal
EDID.
HDMI SPECIAL MENU: MODE 2
When DTS:X can not be outputted due to some problem, it can be
returned to EDID that supports standard DTS:X.
Procedure:
1. While pressing the [TUNER +] and the [PURE DIRECT] but-
tons, press the [
1
] button to turn the power on.
[
1
] press
While pressing
[TUNER +] and [PURE DIRECT]
2. The message “HDMI.M2 ON” appears, it return to EDID that
supports standard DTS:X.
Releasing method:
1. While pressing the [TUNER +] and the [PURE DIRECT] but-
tons, press the [
1
] button to turn the power on again.
2. The message “HDMI.M2 OFF” appears, it return to normal
EDID.