Sony STR-DH590, Руководство по обслуживанию

Страница: 25 / 70

STR-DH590
25
FL DISPLAY TEST MODE
All fl uorescent segments are tested. When the test is activated, all
segments light on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the [SPEAKERS] and the [DIMMER] buttons,
press the [
1
] button to turn the power on.
[
1
] press
While pressing
[SPEAKERS] and [DIMMER]
2. All segments and LEDs turn on.
LEDs turn on
dB
SP B
SP A
LFE
SW
L
SL
SBL
C
S
SB
R
SR
SBR
S-AIR
HDMI
NEO:6
96/24
SAT
CAT
SLEEP
ZONE 2
ST DEX
PL I I x
MONO
RDS
D.RANGE
DTS-ES
COAX
OPT
k Hz
mft.
MHz
MEMORY
3. Each time the [DISPLAY] button is pressed, the display is
changed in order as follows.
All segments turn on
Pattern 1
Pattern 2
All segments turn off
dB
SP B
SP A
LFE SW
L
SL
SBL
C
S
SB
R
SR
SBR
S-AIR
HDMI
NEO:6
96/24
SAT
CAT
SLEEP
ZONE 2
ST DEX
PL I I x
MONO
RDS
D.RANGE
DTS-ES
COAX
OPT
k Hz
mft.
MHz
MEMORY
SP B
LFE
SW
SL
C
SB
SR
S-AIR NEO:6
CAT
SLEEP
RDS
D.RANGE
DTS OPT
dB
SP A
L
SBL
S
R
SBR
HDMI 96/24
SAT
ZONE 2
MONO COAX
MEMORY
Releasing method:
Press a button other than the [DISPLAY] button.
SWAP ALL MODE
The signal will be swap to all channels so that all speakers will
have sound output.
Note: It is necessary to connect speakers to this unit.
Procedure:
1. While pressing the [MOVIE] and [PURE DIRECT] buttons,
press the [
1
] button to turn the power on.
[
1
] press
While pressing
[MOVIE] and [PURE DIRECT]
2. The message “SWAP.MODE” appears.
3. Check that sound is outputted from all channel available based
on the speaker pattern setting.
Releasing method:
Press the [
1
] button to turn the power off.
SAFETY CHECK (VACS OFF) MODE
Safety test (forced VACS off) can be executed.
Procedure:
1. While pressing the [MOVIE] and [DIMMER] buttons, press
the [
1
] button to turn the power on.
[
1
] press
While pressing
[MOVIE] and [DIMMER]
2. The message “VACS OFF” appears, and return to current func-
tion display.
Current function display
(Displayed characters/values in the above fi gure are example)
3. The [INPUT SELECTOR] knob rotate to select an arbitrary
function. The input sound data is output with the VACS OFF
state.
Releasing method:
Press the [
1
] button to turn the power off.