Sony STR-DH510 - 10str Hifi, Руководство по обслуживанию

Страница: 8 / 68

STR-DH510
8
SECTION 2
TEST MODE
AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE
(US, Canadian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Turn the [INPUT SELECTOR] control to set AM and press the
[
?/1
] button to turn off the main power.
1. While depressing the [TUNING MODE] button, press the
[
?/1
] button to turn on the main power.
2. Either the message “9K STEP” or “10K STEP” appears for a
moment and select the desired step.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fl uorescent segments are tested.
When this test is activated, all segments light on at the same time,
then each segment lights on one after another.
* Procedure:
While depressing the [] and the [DIMMER] buttons
simultaneously, press the [
?/1
] button to turn on the main pow-
er.
1. ALL segments light on.
L C R
SL S SR
SBL SB SBR
LH RH SW
COAX OPT
HDMI LFE DTS -ES NEO:6 S-AIR 96/24
DTS-HD MSTR HI RES LBR LPCM
RDS
AAC
TrueHD
SLEEP
D.RANGE
ST
D
PL II
+ EX
MHz
ft.
k Hz m
x z
dB
2. Press the [DISPLAY] button, con fi rm display.
L C R
SL S SR
SBL SB SBR
LH RH SW
COAX OPT
HDMI LFE DTS -ES NEO:6 S-AIR 96/24
DTS-HD MSTR HI RES LBR LPCM
RDS
AAC
TrueHD
SLEEP
D.RANGE
ST
D
PL II
+ EX
MHz
ft.
k Hz m
x z
dB
3. Press the [DISPLAY] button, con fi rm display.
L C R
SL S SR
SBL SB SBR
LH RH SW
COAX OPT
HDMI LFE DTS -ES NEO:6 S-AIR
96/24
DTS-HD MSTR HI RES LBR LPCM
RDS
AAC
TrueHD
SLEEP
D.RANGE ST
D
PL II
+ EX
MHz
ft.
k Hz m
x z
dB
4. Press the [DISPLAY] button, all segments light off.
SOUND FIELD CLEAR MODE
* The preset sound fi eld is cleared when this mode is activated.
Use this mode before returning the product to clients upon com-
pletion of repair.
* Procedure:
1. While depressing the [MUSIC] button, press the [
?/1
] button
to turn on the main power.
2. The message “S.F. CLEAR” appears for a moment and initial-
ization is performed.
SOFTWARE VERSION CHECK MODE
* The software version is displayed.
* Procedure:
1. While depressing the [TUNING MODE] and the [DISPLAY]
buttons simultaneously, press the [
?/1
] button to turn on the
main power.
2. The model name, destination and the software version are
displayed for a moment.
KEY CHECK MODE
* Button check
* Procedure:
1. While depressing the [] and the [MUTING] but-
tons simultaneously, press the [
?/1
] button to turn on the main
power.
2. The message “REST 12” appears.
3. Every pressing of any button other than the [
?/1
] counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
SWAP ALL MODE
* The signal will be swap to all channel so that all speaker will
have sound output.
* Procedure:
1. While depressing the [TUNING MODE] and the [MOVIE]
buttons simultaneously, press the power [
?/1
] button to turn
on the main power.
2. “SWAP.MODE” appears. (No change while displayed.)
SHIPMENT MODE
* All preset contents are reset to the default setting.
* Procedure:
1. While depressing the [TUNING MODE] and the [DIMMER]
buttons simultaneously, press the power [
?/1
] button to turn
on the main power.
2. The message “CLEARING” appears.
3. After a few seconds, “CLEARED” appears and switch off the
set.
PROTECTOR AUTO OFF
* To disable auto off after protector occur.
* Procedure:
1. While depressing the [INPUT MODE] and the [A.F.D.] but-
tons simultaneously, press the power [
?/1
] button to turn on
the main power.
2. “PROTECT” appears.
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com