Sony SSC-SD26P, Руководство по эксплуатации, Страница: 18 / 40

Op
er
at
ion I
n
s
truc
tio
ns
Other menus
18
4
Move the joystick up/down to choose the desired
preset point, and move left/right to set OFF, BLC or
WDR.
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
PRESET MOTION
Main menu
→
<PRESET SETUP> menu
→
<PRESET MOTION> menu
The detection mode can be set for the preset point:
Preset detection can be set to ON or OFF.
The motion detection range of the preset point can be
set with the MOTION AREA item.
The LEVEL item can be set to HI, MID or LOW.
The INTERVAL TIME item can be set between
1 ~ 255 sec
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <PRESET SETUP>, and then
press the
OPEN key to enter the <PRESET
SETUP> menu.
3
Move the cursor to PRESET MOTION, and then
press the
OPEN key to enter.
4
Move the joystick up/down to choose the desired
option, and move left/right to set ON, OFF or a
value.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
Tips
For MOTION AREA, refer to PRIVACY ZONE setting
on Page 12.
Other menus
FREEZE ACTIVITY
When the camera is in frame, random, auto, or preset
scanning modes, the camera screen can be disabled
during movement, and the screen image will only be
shown until the camera reaches the stop point.
Main menu
→
<OTHERS> menu
Set Freeze Activity
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <OTHERS>, and then press the
OPEN key to enter the <OTHERS> menu.
3
Move the cursor to FREEZE ACTIVITY, and then
press the
OPEN key to enter.
4
Move the joystick up/down to choose ON or OFF.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
SCAN TILT ANGLE
The camera tilt angle can be configured for different
application requirements.
Set the Tilt Angle
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <OTHERS>, and then press the
OPEN key to enter the <OTHERS> menu.
3
Move the cursor to SCAN TILT ANGLE, and then
press the
OPEN key to enter.
4
Move the joystick up/down to set the tilt angle
(0 ~ 92°).
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
TOUR P O OFF
PRESET SPEED P O MAX
<TITLE>
PRESET WD P O OFF
<PRESET MOTION>
BACK
PRESET MOTION P O OFF
<MOTION AREA>
LEVEL LOW
INTERVAL TIME 1s
BACK
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
FREEZE ACTIVITY OFF
SCAN TILE ANGLE 30 °
<SCHEDULE>
<MOTION DETECTION>
BACK