Sony SRX-T423, Руководство по эксплуатации

Страница: 69 / 73

69
Specifications
Chap
ter
5
Ot
he
rs
Specifications
Optical characteristics
Projection system
SXRD (Silicon X-tal Reflective Display)
3 panel prism color integration system
SXRD 8,847,360 pixels (4096 × 2160 × 3)
Lens Optional
Light output 23,000 lm (center)
30,000 lm (center, during HBM
1)
)
Lamp 4.2 kW Xenon lamp (not supplied)
1) When using the supplied High Brightness Mode filter. For details, contact
your dealer or your local Sony representative.
Electrical characteristics
Acceptable signal
XGA, Quad-VGA, SXGA, SXGA+,
UXGA, WUXGA, 1920 × 1080, 2048
× 1080 (when the LKRI-005 HDCP
DVI input board is installed)
HD-SDI (SMPTE Serial Digital Interface
standard) (when the LKRI-003 HD-
SDI (4:4:4) input board is installed)
Input/Output
DVI-D DVI connector, 24-pin (male) (For
details, see “Pin assignment” on page
70.)
AUX DVI connector, 24-pin (male) (For
details, see “Pin assignment” on page
70.)
RS-232C D-sub 9-pin (female) (For details, see
“Pin assignment” on page 70.)
ETHERNET 10BASE-T/100BASE-T
Input signal
Preinstalled board (LKRI-005)
XGA, Quad-VGA, SXGA, SXGA+,
UXGA, WUXGA, 1920 × 1080, 2048
× 1080
When the LKRI-003 is installed
SMPTE Format HD-SDI/DC-SDI/Dual-
link HD-SDI/Dual-link DC-SDI
When the LKRI-005 is installed
XGA, Quad-VGA, SXGA, SXGA+,
UXGA, WUXGA, 1920 × 1080, 2048
× 1080
General
Dimensions Approx. 700 × 640 × 1250 mm (27
5
/
8
×
25
1
/
4
× 49
1
/
4
inches) (w/h/d)
(excluding the optional lens and main
unit’s projecting parts)
Mass Approx. 181 kg (399 lb) (excluding the
optional lamp and lens)
Power requirements
200 V to 240 V AC, 50/60 Hz
Power consumption
Max. approx. 5.6 kW
(Standby mode: 29 W)
Current consumption
28 A to 23.4 A
Operating temperature
5°C to 35°C (41°F to 95°F) (About 20
minutes of aging is recommended to
provide better quality picture.)
Performance guarantee temperature
10°C to 30°C (50°F to 86°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Ethernet cable (Câble Ethernet)
(1-830-803-12 (Sony)) (1)
Lens cover (1 set)
M8 screws for lens mounting (4)
Attachment board for the LKRI-003 (4)
Attachment board for the LKRI-005 (3)
Keys (4)
High Brightness Mode filter (1 set)
Operating Instructions (this document, 1)
Optional accessories
Projection lamp
LKRX-2042A
HD-SDI (4:4:4) input board
LKRI-003 (HD-SDI input/output with 4
BNC-type connectors)
HDMI input board
LKRI-006
HDCP DVI input board
LKRI-005 (2DVI-D input connectors)
Projection lens LKRL-Z140, LKRL-Z211, LKRL-Z214,
LKRL-Z219, LKRL-A002,
LKRL-A003, LKRA-005, LKRA-006
(For details, refer to the Operating
Instructions of each projection lens.)
3D filter LKRA-005, LKRA-006