70
Specifications
Chapt
er 5 Ot
her
s
Design and specifications are subject to change without
notice.
Pin assignment
RS-232C connector (D-sub 9-pin, female)
1)
Circuit between pins 4 and 6 is short-circuited in the projector.
2)
Circuit between pins 7 and 8 is short-circuited in the projector.
DVI-D connector, AUX connector (24-pin, male)
Equipment complying with IEC 61000-3-12
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT OR
MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT THAT
MAY RESULT DUE TO CIRCUMSTANCES OF
ANY KIND.
Pin number
Signal name
Meaning
1
NC
2
RD
Received Data
3
TD
Transmit Data
4
DTR
1)
Data Terminal Ready
5
GND
Ground
6
DSR
1)
Data Set Ready
7
RTS
2)
Request to Send
8
CTS
2)
Clear to send
9
NC
1
2
3
4
5
6
7
8
9
Pin number
Signal name
1
DATA2–
2
DATA2+
3
GND
4
DATA4–
5
DATA4+
6
DDC_SCL
7
DDC_SDA
8
NC
9
DATA1–
10
DATA1+
11
GND
12
DATA3–
13
DATA3+
14
+5V
15
DDC_GND
16
HOTPLUG_DET
17
DATA0–
18
DATA0+
19
GND
20
DATA5–
21
DATA5+
22
GND
23
CLK+
24
CLK–
1
9
17
2
10
18
3
11
19
4
12
20
5
13
21
6
14
22
7
15
23
8
16
24
