Sony SRX-T105 Скачать руководство пользователя страница 36

Страница: 36 / 44

Error Messages

C
h

r 4
O

Error Messages

The error messages are displayed in the STATUS MESSAGE window on the left side of projector and the Error display
window of the SRX Controller. If there are two or more messages, a displayed message changes each five seconds.

No.

Error messages

Meaning

Remedy

INPUT-A POWER ALERT

Trouble with power of INPUT A board

Replace the INPUT A board.

INPUT-B POWER ALERT

Trouble with power of INPUT B board

Replace the INPUT B board.

INPUT-C POWER ALERT

Trouble with power of INPUT C board

Replace the INPUT C board.

INPUT-D POWER ALERT

Trouble with power of INPUT D board

Replace the INPUT D board.

PR-284_1 POWER ALERT

Trouble with power of PR-284 board at
the top

Replace the corresponding PR-284 board.

PR-284_2 POWER ALERT

Trouble with power of PR-284 board on
the second row

Replace the corresponding PR-284 board.

PR-284_3 POWER ALERT

Trouble with power of PR-284 board on
the third row

Replace the corresponding PR-284 board.

PR-284_4 POWER ALERT

Trouble with power of PR-284 board on
the fourth row

Replace the corresponding PR-284 board.

24V POWER SUPPLY ALERT

The projector has failed to supply 24V
power.

Overload on the 24 V line. Replace the AC inlet
on the projector.

16V POWER SUPPLY ALERT

The projector has failed to supply 16V
power.

Overload on the 16 V line. Replace the AC inlet
on the projector.

PR-284_1 DETACHED

The PR-284 board is not attached
correctly on the top row.

Attach the PR-284 board on the top row correctly.

SXRD PANEL TEMPERATURE
ALERT

The temperature of the panels is too
high.

Check the panel cooling fan or the ventilation
holes for intake.

LAMP_A FAN ALERT

Trouble with the sirocco fan for Lamp A,
or the harness is disconnected or down.

Check the connection of the Lamp A fan, or
replace the fan.

LAMP_B FAN ALERT

Trouble with the sirocco fan for Lamp B,
or the harness is disconnected or down.

Check the connection of the Lamp B fan, or
replace the fan.

LAMP_A POWER SUPPLY UNIT
FAN ALERT

Trouble with the fan for Lamp A power
(ballast), or the harness is disconnected
or down.

Check the connection between the Lamp A power
and the SY board, or replace the fan for Lamp A
power.

LAMP_B POWER SUPPLY UNIT
FAN ALERT

Trouble with the fan for Lamp B power
(ballast), or the harness is disconnected
or down.

Check the connection between the Lamp B power
and the SY board, or replace the fan for Lamp B
power.

PR-284 FAN FAILURE

Trouble with the fan for PR-284 board,
or the harness is disconnected or down.

Check the connection between the fan located on
the side of the board shield and the SY board, or
replace the fan.

OPTICAL UNIT TEMPERATURE
ALERT

The temperature of the optical unit is too
high, or the harness is disconnected or
down.

The ventilation hole for intake on the projector
may be blocked. Check the projector is installed
properly.

LAMP_A TEMPERATURE
ALERT

The temperature of Lamp A is too high,
or the harness is disconnected or down.

The ventilation hole for intake on the projector
may be blocked. Check the projector is installed
properly.

LAMP_B TEMPERATURE
ALERT

The temperature of Lamp B is too high,
or the harness is disconnected or down.

The ventilation hole for intake on the projector
may be blocked. Check the projector is installed
properly.

LAMP_A HOUSE DETACHED

The projection lamp house of Lamp A is
detached, or the harness is disconnected
or down.

Check the attachment screw on the projection
lamp house of Lamp A or the harness.

Содержание SRX-T105













































Результаты поиска

Содержание SRX-T105

Отзывы:

Похожие инструкции для SRX-T105

Бренды по названию

Популярные бренды

Sony SRX-T105, Руководство по установке

Результаты поиска

Содержание SRX-T105

Отзывы:

Похожие инструкции для SRX-T105

Бренды по названию

Популярные бренды