Wireless Speaker
SRS-XB501G
Listening to music from the connected BLUETOOTH device
You can enjoy listening to music of a BLUETOOTH device and operate it by the speaker via a BLUETOOTH connection
if it supports the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution Profile)
Enables you to enjoy high-quality audio contents wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.
Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the
BLUETOOTH device.
Note
Make sure beforehand that the volume on the BLUETOOTH device and speaker are set to a moderate level to avoid sudden loud
sound output from the speaker.
Depending on the BLUETOOTH device, adjusting the volume of the speaker may not be possible on the BLUETOOTH device
while playback on the device is stopped/paused.
On the BLUETOOTH device, make sure that a BLUETOOTH connection is established with the speaker.
1
Start playing music on the BLUETOOTH device.
2
Adjust the volume by pressing the –/+ (volume) buttons on the speaker or operating the BLUETOOTH
device.
When you press the –/+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH device, the
(power) indicator flashes once or 3 times.
When you press and hold the
(play) button on the speaker for about 3 seconds, the action is equivalent to
saying “Ok Google” to the speaker.
During playback, you can use the
(play) button on the speaker to perform the following operations.
Pause
Press the
(play) button during playback to pause. Press it again to cancel pause.
Skip to the beginning of the next track
Press the
(play) button twice quickly during playback.
Skip to the beginning of the current track
Press the
(play) button 3 times quickly during playback.
3
34
