Sony SRP-X100, Руководство по эксплуатации

Страница: 10 / 16

10
Specifications
Specifications
INPUTS/OUTPUTS
0dBu=0.755V
1)
MONO 1 - 2: MIC level only
MONO 3 - 6: MIC level or LINE level selectable
OTHERS
Power requirements
AC 120/230V (switch selectable)
50/60Hz
Power consumption
19W
Peak inrush current
(1) Power ON, current probe method: 1 A
(240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 1 A
(230 V)
Dimensions 482
×
44
×
175 mm (width/height/depth)
not including max protrusion
Mass Approx. 2.6 kg
Operating temp. 0
°
C to 40
°
C
Storage temp.
–
20
°
C to +60
°
C
Supplied accessories
Operating instructions (1)
For US and Canada: AC power cord (1)
For other areas: AC power cord (2)
(EURO type and US type)
Design and specifications are subject to change without
notice.
Item Conditions Standard
Frequency response
(LINE/STEREO-IN)
20Hz to 20kHz, 1kHz fundamental, MASTER OUT
5Hz to 100kHz, 1kHz fundamental, MASTER OUT
+0.5dB/–1dB
+0.5dB/–2dB
Total harmonic distortion (T.H.D.) MONO IN-MASTER OUT, 1kHz –44dBu input
STEREO IN-MASTER OUT, 1kHz +4dBu input
STEREO IN-MASTER OUT, 1kHz –10dBu input
less than 0.01%
less than 0.005%
less than 0.005%
Residual noise level ch fader: -
∞
MASTER VOL: 0 MASTER OUT IHF-A less than –83dBu
Equivalent input noise MONO IN input terminal at 150
Ω
IHF-A less than –126dBu
Crosstalk 1kHz across L-R
1kHz across channels
1kHz across MAX-MIN (ch fader)
less than –70dB
less than –80dB
more than 90dB
Connector Connector type Channel Reference I/O Level Max I/O Level I/O Impedance
MONO IN
1)
XLR3-31 6 MIC: –60dBu
LINE: +4dBu
MIC: –30dBu
LINE: +24dBu
MIC: more than 2.2k
Ω
LINE: more than 10k
Ω
STEREO IN PHONO 3 (Stereo) –10dBu +10dBu more than 47k
Ω
REC OUT PHONO 1 (Stereo) –10dBu +10dBu less than 470k
Ω
SUB OUT PHONO 2 –5dBu +15dBu less than 470k
Ω
MASTER OUT XLR3-32 1 (Stereo) +4dBu +24dBu less than 47
Ω
+48 V Power supply MONO 1 - 6 jacks (MONO 3 - 6 are only during Mic level settings)
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.