Sony SPP-SS961 - Cordless Telephone, Руководство по эксплуатации

Страница: 18 / 78

18
EN
Telephone Features
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong number in step 3 and have not pressed
(VOL/PGM)
(step 4) yet, just turn Jog Dial down to erase it. Then enter the
correct number.
• You may press Jog Dial instead of
(VOL/PGM)
in step 4.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 3 on page 17, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press
(PAUSE)
.
To change a stored number
1
Press
(VOL/PGM)
.
2
Press one of the ONE-TOUCH DIAL buttons (
(A)
to
(C)
).
The current number appears on the display.
3
Turn Jog Dial down to erase the current number.
4
Enter a new number.
5
Press
(VOL/PGM)
.
Note
You can replace the stored number with a new number, but you can’t just erase it.
Making calls with one-touch dialing
1
Press
(TALK)
and wait until “TALK” appears on the display.
2
Press one of the ONE-TOUCH DIAL buttons (
(A)
to
(C)
).
The phone number stored on the one-touch dialing button
will appear on the display and will be dialed.
To check the phone number before one-touch dialing
While the handset isn’t in use, press one of the ONE-TOUCH DIAL
buttons (
(A)
to
(C)
).
The number stored on the button appears on the display for five
seconds. To dial the number, press
(TALK)
while the number is
displayed.
One-touch dialing (continued)