background image

Resetting the digital security code

The first time you charge the battery pack, a random security code is automatically 
assigned between the base unit and the handset. Only a handset which has this 
security code can make calls through the base unit. This system prevents the 
possibility of other cordless telephone handsets making calls through your base unit. 
You normally do not need to reset the security code. However, in the unlikely event 
that you suspect that another cordless phone uses the same security code, you can 
manually change the code. Pick up the handset from the base unit, and proceed as 
follows:

Note 

If the battery pack in the handset is completely discharged, or is removed from the handset for 
more than several seconds, the digital security code stored will be lost. If this happens, charge the 
battery pack and a new security code will be automatically assigned.

Tip

This procedure will change the code in both the base unit and the handset. The code can be 
changed as often as desired.

Mounting the base unit on a wall

1

Attach the telephone line cord and AC power adaptor cord to the base 
unit. Bundle the loose telephone line cord or AC power adaptor cord, if 
necessary.

2

Plug the telephone line cord into the telephone outlet, and hook the base 
unit to the wall plate as illustrated. Plug the AC power adaptor to an AC 
outlet. Then raise the antenna so that it points towards the ceiling.

Maintenance

• Clean the cabinets with a soft cloth slightly moistened with water or a mild 

detergent solution. Do not use any type of abrasive pad, scouring powder or 
solvent such as alcohol or benzine as they may damage the finish of the cabinet.

• If the charge terminals of the base unit and handset are soiled, wipe them with a 

soft cloth.

If you have any questions or problems concerning your phone, please consult your 
nearest Sony dealer.

Notes on power sources 

On battery pack

• Store the battery pack at a temperature between 41°F (5°C) and 95°F (35°C) for 

best performance.

• If you do not use the cordless handset for a long period of time, remove the battery 

pack.

On power failure

• During a power interruption, you cannot make or receive calls.

For the customers in the USA

RECYCLING NICKEL-CADMIUM BATTERIES

Nickel-Cadmium batteries are recyclable. You can help preserve our 
environment by returning your unwanted batteries to your nearest 
point for collection, recycling or proper disposal.
Note: In some areas the disposal of nickel-cadmium batteries in 

household or business trash may be prohibited.

RBRC (Rechargeable Battery Recycling Corporation) advises you 
about spent battery collection by the following phone number.

Call toll free number: 1-800-822-8837 (United States and 
Canada only)

Caution: Do not handle damaged or leaking nickel-cadmium batteries.

Troubleshooting

Should any problem persist after you have made these checks, consult your nearest 
authorized Sony dealer. 

Specifications

General

Operating frequency

902-928 MHz bands

Frequency control

Crystal-controlled PLL

Operation mode

FM, duplex

Operation channel

30 channels

Supplied accessories

AC power adaptor AC-T127
Telephone line cord
Rechargeable battery pack BP-T50

Handset

Power source

Rechargeable battery pack BP-T50

Battery life

Standby:

Approx. 30 days

Talk:

Approx. 10 hours

Dimensions

Approx. 2 

1

/

4

 × 7 

1

/

8

 × 1 

15

/

16

 inches (w/h/d), antenna excluded 

(approx. 55 × 180 × 48 mm)
Antenna: Approx. 1 

15

/

16

 inches (approx. 48 mm)

Mass

Approx. 5.5 oz (approx. 155 g), battery included

Base unit

Power source

DC 9V from AC power adaptor

Battery charging time

Approx. 12 hours

Dimensions

Approx. 4 

1

/

4

 × 2 

1

/

8

 × 8 

3

/

8

 inches (w/h/d), antenna excluded 

(approx. 107 × 52 × 212 mm)
Antenna: Approx. 4 

5

/

8

 inches (approx. 115 mm)

Mass

Approx. 7.6 oz (approx. 215 g)

Design and specifications are subject to change without notice.rencia rápida

1

Press 

(PGM)

.

The TALK/BATT LOW lamp 
flashes. 

2

Press 

(#)

.

You hear a confirmation beep.

3

Press three of the dialing keys 
(001 to 999) to store a new code.

4

Press 

(PGM)

.

You hear a long confirmation 
beep and the TALK/BATT LOW 
lamp goes off.

5

Immediately replace the handset 
on the base unit.
You hear a long confirmation 
beep and the phone stores the 
new code.

1, 4

2

TALK/BATT 
LOW lamp

1

2

AC power 
adaptor cord

Telephone 
line cord

Bundle the loose 
telephone line cord 
or AC power 
adaptor cord, if 
necessary.

Wall plate

AC power 
adaptor

AC outlet

Symptom

Remedy

The handset does not make 
or receive a call.

• Reset the digital security code.
• Place the base unit away from noise sources such as TV, 

FM radio or PC.

• Make sure the base unit is connected to an AC outlet.
• The battery pack may be discharged. Charge the battery 

pack for more than 12 hours.

You hear no dial tone.

• Make sure the telephone line cord is securely connected 

to the telephone outlet.

The handset does not 
connect at all, even the 
numbers you dial are 
correct.

• Choose an appropriate dialing mode again.

The handset does not redial 
correctly.

• Make sure the number (including the tone and pause 

digits, if used) you last dialed is less than 32 digits.

The handset does not make a 
speed dialing call.

• Make sure there is a phone number correctly stored in 

the speed dialing.

• Store the desired phone number once more.

The handset does not ring.

• Make sure the base unit is connected to an AC outlet.

The handset does not ring 
when paging from the base 
unit.

• The battery may have little or no power. Charge the 

battery pack for more than 12 hours.

• Place the base unit away from noise sources.

You hear a beep every three 
seconds and the TALK/
BATT LOW lamp flashes.

• Charge the battery pack for more than 12 hours.

The handset does not work.

• The battery pack may be discharged. Charge the battery 

pack for more than one minute. After this initial one 
minute, you may be able to use the handset, but more 
than 12 hours are necessary for full charging.

Содержание SPP-N1000







Отзывы: