Sony SPP-M937, Руководство по обслуживанию

Страница: 21 / 39

– 25 – – 26 –
SPP-M937
5-5. SCHEMATIC DIAGRAM – BASE MAIN SECTION (2/2) –
Note:
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
• 2 : nonflammable resistor.
Note: The components identified by mark
0
or dotted
line with mark
0
are critical for safety.
Replace only with part number specified.
• : B+ Line.
•
H
: adjustment for repair.
• Power voltage is dc 9V and fed with regulated dc power
supply from external power voltage jack (J6).
• Voltages and waveforms are dc with respect to ground in
test mode.
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
N : RX
P
: BELL
1
VOLT/DIV : 0.5 V AC
TIME/DIV : 0.1
µ
sec
1.3 Vp-p
4MHz
U2
2
XOUT
z
Waveform