Sony SPP-M932 Primary, Руководство по эксплуатации

Страница: 14 / 80

Basics
14 EN
1
Pick up the handset from the
base phone.
2
Press
(LINE 1)
or
(LINE 2)
to
select the line.
The corresponding button lights
up.
You then hear a dial tone. If you
hear an error beep, move closer
to the base phone.
3
Dial the phone number.
4
When you're done talking, press
(OFF)
or replace the handset on
the base phone.
The LINE 1 or LINE 2 button
goes off.
Making calls
Basics
(HOLD)
To Do this
Put a call on hold Press
(HOLD)
. The LINE 1 or LINE 2 button
will flash slowly.
A beep sounds every 20 seconds to inform you
that the line is put on hold.
Press
(LINE 1) or (LINE 2) to resume the
conversation.
Improve reception Press (CHANNEL) .
Adjust the handset volume Slide the VOL switch.
Switch to tone dialing Press (*TONE) after you’re connected.
temporarily The line will remain in tone dialing until
disconnected.
Additional tasks
Tips
• You can talk on the base phone by pressing (LINE 1) or (LINE 2) on the base
phone after you have dialed on the handset (speakerphone).
• The LINE 1 or LINE 2 button flashes in sets of two, when the base phone or
another extention is used.
(*TONE)
VOL switch
(REDIAL/PAUSE)
(CHANNEL)