Sony SPP-A940 - 900 Mhz Cordless Telephone, Руководство по эксплуатации

Страница: 17 / 80

16
EN
Telephone Features
Speed dialing (continued)
To store the previous number dialed
Press
(REDIAL)
directly after step 2, then go to step 4.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 3 on the previous page, do as
follows:
1
Enter the outside line access digit (e.g. 9).
2
Press and hold the number button down before the position
where the pause is to be inserted.
For example, 9, pause, 555-1234 would be programmed by
pressing and holding the 9 button until it beeps twice, then
entering 5, 5, 5, 1, 2, 3, 4. The pause is two seconds in length.
To enter a longer pause, press and hold the button down
until the handset beeps three or four times. Each additional
beep indicates an additional two second pause.
Note
Each pause is counted as a digit.
To change a stored number
To store a new number, follow the instructions described on the
previous page.
Making calls with speed dialing
1
Press
(TALK)
.
The TALK lamp lights up.
2
Press
(SPEED˚DIAL)
.
3
Enter the desired speed dialing number (
v
to
c
).
The phone number stored in the speed dialing number will
be dialed.