81-IN6605 12202011
Installation and Operation Instructions for the following model:
SNCA-HRX550/EXT, SNCA-HRX550/INT,
& SNCA-HRX550EXT/W
Outdoor and Indoor Dome Housings
SNCA-HRX550/EXT Outdoor Pendant Housing with heater & blower, clear lower dome
SNCA-HRX550/INT Indoor Pendant Housing with heater & blower, tinted lower dome
SNCA-HRX550EXT/W Outdoor Pendant Housing with heater & blower, clear lower dome,
and a wireless antenna cable
Note: AC 24V power supply for the camera and the heater/blower is an installer/re-seller
provided item. Please refer to
Electrical Specifications
for power consumption details.
Indoor models do not have heater/blower or pre-run cables.
Note: Please note that to achieve the increased depth with the aspheric design for optimal
camera lens to capsule orientation, the capsule is slightly angled around the highest
section. This creates a ”line’, visible to the naked eye, around the upper most section
of the capsule. This “line” serves as the geometric center line used to insure proper
camera placement. It is not typically seen by the camera. However, Sony RZ series PTZ
cameras are able to tilt up above the horizon to 25°, this wide range of tilt motion at
a wide angle view may cause this line to be captured in the image.
Mounting instructions for:
SNC-RZ25
SNC-RX530, 550, 570
SNC-RS44, 46
SNC-RH124
SNC-EP580, 550, 520
SNC-ER580, 550, 520