Understanding the display
Your SmartBand Talk features an E Ink® display that uses electronic ink technology
to reproduce the appearance of ordinary ink on paper. In an E Ink® display, no
backlight is used. Instead, ambient light from the environment is reflected from the
surface of the display, making it more comfortable to read. The image on your E Ink®
screen is retained even when power to the screen is turned off. Also note that when
the content displayed on the screen changes, there is a brief transition time. This is
normal E Ink® display behavior.
Interacting with the SmartBand Talk
You can control applications by firmly tapping the SmartBand Talk and you can
navigate from screen to screen by pressing the function key. If the screen is idle for
30 seconds, the idle mode screen becomes active.
Tapping
•
Handle installed applications, for example, add bookmarks.
The display of the SmartBand Talk is not touch sensitive. Remember to firmly tap the
SmartBand Talk in order for the device to register a command. Also note that the screen does
not recognise swiping movements.
Function key
You can use the function key to navigate between different screens and applications.
To navigate from one screen to another
•
Short press the function key.
To exit an application
•
Long press the function key. After the application closes, the idle mode screen
becomes active.
Charging your SmartBand Talk
Before using your SmartBand Talk for the first time, you need to charge it for
approximately 30 minutes. Sony chargers are recommended.
If your SmartBand Talk is not used during charging, it takes 45 to 70 minutes to fully
charge it depending on the type of charger used.
4
This is an Internet version of this publication. © Print only for private use.
Содержание SmartBand Talk SWR30
Страница 1: ...User guide SmartBand Talk SWR30 ...
