Basic Operations
29
Basic Operations
SLV-ED70MN (E) 3-865-382-12(1)
SP
APC
START
3
Press the EASY TIMER knob to confirm the clock setting.
The VCR enters the timer recording setting mode.
To continue the easy timer
setting, go to step 2 in
“Setting the easy timer” on
page 26.
To quit the easy timer setting mode without changing any settings,
press the EASY TIMER knob repeatedly until the
t
indicator
appears in the display window.
To set the timer and clock setting using the remote commander
You can also use the remote commander to set the easy timer and easy clock.
The operations on the VCR and the remote commander correspond as
follows:
To
Confirm the setting and go to
the next setting
Change the time by 15 minutes
(in START/STOP mode)
Change the time by one minute
(in START/STOP mode)
Select the programme
Change the hour/minute by
one hour/minute (in CLOCK
mode)
Do this on the VCR
Press EASY TIMER knob
Turn EASY TIMER knob
or hold P/–
down
Press P/–
Turn EASY TIMER knob
or press P/–
or INPUT SELECT
Turn EASY TIMER knob
or press P/–
Do this on the remote
commander
Press EASY TIMER
Hold PROG +/– down
Press PROG +/–
Press PROG +/– or
INPUT SELECT
Press PROG +/–
continued
You can also use the programme number buttons to set the clock, start and
stop times, and the programme you want to record. Just press the
programme number buttons to enter the hours and minutes. For example:
• To set the clock to “8:20”, press 0, 8, EASY TIMER , 2, 0 and EASY TIMER
in sequence.
• To set the start or stop time to “8:20”, press 0, 8, 2, 0 and EASY TIMER in
sequence.
If you make a mistake, re-enter the correct digits before pressing
EASY TIMER .
EASY TIMER
4/19-32_SLV-ED70MN.12E
1/17/01, 2:30 PM
29
