Sony SLV-E295UX страница 58 Скачать руководство пользователя

Страница: 58 / 68

Additional Information

Timer r

ecor

ding

Recor

ding

Symptom

No TV programme appears
on the TV screen.

TV reception is poor.

The tape starts playing as soon
as it is inserted.

The tape is ejected when you
press

REC.

Nothing happens when you
press

REC.

The timer does not operate.

Remedy

• Make sure the TV is set to the video channel. If you are

using a monitor, set it to video input.

• If the VCR is connected to the TV using only the aerial

cable, make sure that RF MODULATOR in the
OPTIONS menu is set to ON.

• Adjust the TV aerial.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.
• Select the correct source with the INPUT SELECT

button. Select a programme position when recording
TV programmes; select “L1,” “L2,” or “L3” when
recording from other equipment.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings have not already passed

the current time.

• Check that the decoder is turned on.
• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the

mains for more than one hour. Reset the clock and
timer.

continued

Содержание SLV-E295UX





































































Результаты поиска

Содержание SLV-E295UX

Отзывы:

Похожие инструкции для SLV-E295UX

Бренды по названию

Популярные бренды

Sony SLV-E295UX, Руководство по эксплуатации

Результаты поиска

Содержание SLV-E295UX

Отзывы:

Похожие инструкции для SLV-E295UX

Бренды по названию

Популярные бренды