Getti
ng Sta
rted
13
Connecting the DVD-VCR
Step 3 : Connecting the DVD-VCR
For connecting the DVD-VCR, antenna and your TV, select one of the following patterns
A
or
B
, according to the input jack on your TV.
Tip
• “Advanced Hookups” (page 27) explains additional hookup methods that will optimize the
picture and sound for a true “hometheatre” experience.
Note
• You cannot connect the DVD-VCR to a TV that does not have a SCART or video input jack.
A
Use this hookup if your TV has an audio/video connector
1
Disconnect the aerial cable from your TV and
connect it to
on the rear panel of the DVD-
VCR.
2
Connect
of the DVD-VCR and the aerial
input of your TV using the supplied aerial
cable.
3
Connect OUT AUDIO L/R VIDEO jacks of
the DVD-VCR and audio/video connector of
your TV using an audio/video cord.
4
Connect the mains lead to the mains.
If you connect additional equipments to the DVD-VCR (page 15, 27, 29), be
sure to connect the mains lead after all connections are completed.
Mains lead
AERIAL IN
to mains
Aerial cable (supplied)
: Signal flow
Audio/video cord
(not supplied)
Audio/video
inputs
continued
Содержание SLV-D983P GI
Страница 120: ...Sony Corporation Printed in Indonesia AK68 00933A ...