1-6
30
Playing discs
Basic Operations
Playing discs
Depending on the disc, some operations may
be different or restricted. Refer to the
operating instructions supplied with your
disc.
Before you start ...
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Press SELECT DVD to control the DVD
player.
1
Press
Z
to open the disc tray and
place a disc on the disc tray.
Z
SELECT DVD
H
PLAY
X
PAUSE
m/M
x
STOP
?/1
.
/
>
with the playback side
facing down
C
31
Playing discs
B
asic Opera
tions
Additional tasks
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing
?/1
.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode
Press
m
or
M
. With each press, the playback speed changes as follows.
×
2
t
×
4
t
×
8
t
×
16
t
×
32
t
×
128
Release the button at the desired speed.
When you find the point you want, press
H
PLAY.
To watch slow motion in continuous play mode
Press
X
PAUSE, then press
M
SLOW
y
. With each press, the playback speed
changes as follows.
1/8
t
1/4
t
1/2
To resume normal playback, press
H
PLAY.
2
Press
H
PLAY.
The disc tray closes and the DVD player starts playback.
The display window shows the
playback time.
Depending on the disc, a menu
may appear on the TV screen.
For DVDs, see page 60. For
VIDEO CDs, see page 77.
To
Press
Stop
x
STOP
Pause
X
PAUSE
To resume playback, press
H
PLAY.
Advance by frame in pause mode
C
Go to the next chapter, track, or scene
in continuous play mode
>
on the remote
Go back to the previous chapter, track,
or scene in continuous play mode
.
on the remote
Stop play and remove the disc
Z
1
While playing a disc, press
x
STOP to stop playback.
2
Press
H
PLAY.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
PLAY
Hour
Minute Second
continued
32
Playing discs
Note
• You can change the screen type using the “SCREEN SETUP” menu. (See “Screen Setup” on
page 52)
Notes on playing DTS* sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be
connected to the digital jack of the DVD player.
• Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a
CD (page 71).
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in
“AUDIO SETUP” menu (page 50), and may affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
• When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”
• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to
“On” in “AUDIO SETUP” menu (page 50). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
* “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems,
33
Guide to the on-screen display
B
asic Opera
tions
Guide to the on-screen display
Press DISPLAY. The following information appears; type of disc, current title/track,
chapter, counter position, voice language and subtitle language. Refer to “DVD
AUDIO/SUBTITLE LANGUAGE” on page 102 for the abbreviation of the language.
You can playback the desired title/track, chapter or counter position using this menu.
To playback the desired title/track or chapter
The title/track or chapter icon will appear on the DVD playback screen followed by
the current title/track or chapter number and the counter positon.
To playback from the desired counter position
You can check disc information during
playback.
The displayed contents differ according to
the type of disc being played.
1
Press
V/v
to select the desired item.
2
Press
B/b
to change the item.
3
Press ENTER to start playback.
4
Press DISPLAY or
O
RETURN to turn off the menu.
1
Press
V/v
to select the counter position icon.
2
Enter the desired position using the number buttons.
3
Press ENTER to start playback.
4
Press DISPLAY or
O
RETURN to turn off the menu.
DISPLAY
V/v/B/b
ENTER
DISPLAY
DISPLAY
O
RETURN
DVD
T:01
C:02
0:01:09
ENG 5.1CH
ENG
B b
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
DVD
T:01
C:02
0:01:09
ENG 5.1CH
ENG
B b
DVD
T:01
C:02
0:01:09
ENG 5.1CH
ENG
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299