60
GB
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring
powder, or solvent, such as thinner, benzine,
or alcohol.
On
Bluetooth
communication
•
Bluetooth
devices should be used within
approximately 10 meters (unobstructed
distance) of each other. The effective
communication range may become shorter
under the following conditions.
– When a person, metal object, wall or other
obstruction is between the devices with a
Bluetooth
connection.
– Locations where a wireless LAN is
installed.
– Around microwave ovens that are in use.
– Locations where other electromagnetic
waves occur.
•
Bluetooth
devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth
device near a device with wireless LAN
capability, electromagnetic interference may
occur. This could result in lower data transfer
rates, noise, or inability to connect. If this
happens, try the following remedies:
– Try connecting this system and
Bluetooth
device when you are at least 10 meters away
from the wireless LAN equipment.
– Turn off the power to the wireless LAN
equipment when using your
Bluetooth
device within 10 meters.
• The radio waves broadcast by this system may
interfere with the operation of some medical
devices. Since this interference may result in
malfunction, always turn off the power on this
system and
Bluetooth
device in the following
locations:
– In hospitals, on trains, in airplanes, at gas
stations, and any place where flammable
gases may be present.
– Near automatic doors or fire alarms.
• This system supports security functions that
comply with the
Bluetooth
specification as a
means of ensuring security during
communication using
Bluetooth
technology.
However, this security may be insufficient
depending on the setting contents and other
factors, so always be careful when performing
communication using
Bluetooth
technology.
• Sony cannot be held liable in any way for
damages or other loss resulting from
information leaks during communication
using
Bluetooth
technology.
•
Bluetooth
communication is not necessarily
guaranteed with all
Bluetooth
devices that
have the same profile as this system.
•
Bluetooth
devices connected with this system
must comply with the
Bluetooth
specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the
Bluetooth
specification, there may be cases where the
characteristics or specifications of the
Bluetooth
device make it impossible to
connect, or may result in different control
methods, display or operation.
• Noise may occur or the audio may cut off
depending on the
Bluetooth
device connected
with this system, the communications
environment, or surrounding conditions.
Specifications
Amplifier section
The following are measured at:
Russian model:
AC 220 V – 240 V, 50/60 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
SHAKE-100D
WF (Woofers)
Power Output (rated):
700 W + 700 W (at 10 ohms, 1 kHz,
1% THD)
RMS output power (reference):
900 W + 900 W (per channel at
10 ohms, 1 kHz)
MID (Mid speakers)/TW (Tweeters)
RMS output power (reference):
300 W + 300 W (per channel at
8 ohms, 2 kHz)
IMPORTANT NOTICE
Caution:
If you leave a still video image
or on-screen display image displayed on
your TV for an extended period of time via
this system, you risk permanent damage to
your TV screen. Projection TVs are
especially susceptible to this.
Содержание SHAKE-100D
Страница 70: ......
Страница 71: ......
Страница 72: ... 2014 Sony Corporation Printed in Malaysia ...