SEL1018 (E 4/10-18 OSS) (E 10-18mm F4 OSS)
4-13
4. Click the [Connect] button and check that the connection status becomes “Connect”.
Method for Finishing the E-Mount Lens Adjustment
Finishing Procedure
1. Click the [Disconnect] button and check that the connection status becomes “Disconnect”.
2. Click the [×] button on the upper right of the main window to finish.
3. Turn off the power of camera.
4-5-4. Adjustment Method of Each Item
Method of Adjustment
1. Click the button for corresponding adjustment item in the Adjustment and Inspection.
Adjustment method of “Flange Back (S)”
About “Flange Back (S)” item, the operation of lens side is needed.
Note:
Be sure to move the zoom to TELE end, start the adjustments.
When operating the lens, operate it while holding a camera body by hand well.
So that a lens does not work. And never touch the focus ring.
1. Click the [Flange Back (S)] button to display he START screen.
After completing the preparation of adjustments, push the ENTER key.
2. After changing the screen to “ZOOM-WIDE”, rotate the zoom ring to WIDE end, push the ENTER key and the automatic adjustment of WIDE
end is started.
3. After automatic adjustment is completed normally, “ZOOM-TELE” is displayed.
Rotate the zoom ring to TELE end, push the ENTER key, automatic adjustment of TELE end is started.
