12
DR (Disaster Recovery
*
) Mode
To enable DR Mode, set position 1 [Drive Mode] switch to ON.
ON
OFF
1
2
3
4
5
6
7
8
*
In Disaster Recovery Mode, an SDX-700 series drive enters the DR
Standby Mode 15 seconds after you insert a write-protected tape into the
drive, and all the drive LED blink. If you restart the drive while the LED
are blinking, it starts as a CD-ROM device.
For details about the Disaster Recovery Mode, refer to the instruction
manual that came with the application software you are using.
Emulation Mode
*
To enable Emulation Mode, set position 1 - 4 [Drive Mode] switches to
ON.
ON
OFF
1
2
3
4
5
6
7
8
*
Emulation Mode returns the following in the Product Identification field
of Inquiry of a SDX-700V series drive.
SDX-700C
Data Compression Control DIP switch
Data compression can be selected by DIP switches. Data compression is
enabled while position 7 [DC Control (1)] is ON. Control by host can be
disabled when position 8 [DC Control (2)] is ON.
1
Drive Mode (ON)
2
Drive Mode (ON)
3
Drive Mode (ON)
4
Drive Mode (ON)
5
Terminator Power
6
Periodic Cleaning Req
7
DC Control (1)
8
DC Control (2)
1
Drive Mode (ON)
2
Drive Mode
3
Drive Mode
4
Drive Mode
5
Terminator Power
6
Periodic Cleaning Req
7
DC Control (1)
8
DC Control (2)
