Sony SDM-S51, Руководство по обслуживанию

Страница: 17 / 24

SDM-S51(E) 2-6
2-5. W/B ALIGNMENT PROCEDURE
A. Measurement Condition:
- Measurement point: Center of screen
- Measurement distance: 50 cm
- Measurement Angle: 90Åã
B. Measurement equipment:
- Color Analyzer: Minolta CS-1000 or equivalent
- Signal Generator: VG-828D or equivalent
C. Alignment Procedure:
Alignment Procedure Parameter Setting & Specification
1. Aging: more than 30 minutes Burn-in mode: press "BRT"+"OK" then "Power ON"
2. Enter to "Service Mode" Service mode: press " "+" " then "Power ON"
3. RGB reset MaintainConfigurationRGB Reset
4. Initial Data Setting: S51: S81:
a. Brightness: 50 a. Brightness: 50
b. Contrast: 70 b. Contrast: 70
c. Sub-BRT (R/G/B): 128 c. Sub-BRT (R/G/B): 26
d. Sub-CONT (R/G/B): 50 d. Sub-CONT (R/G/B): 128
5. Input gray raster pattern 35 IRE (1024*768, 60K/75Hz) 30 IRE (1280*1024, 80K/75Hz)
6. Adjust White Balance (9300K, 6500K & 5000K) and Luminance
(10 nits @ SONY CS-1000) by Sub-BRT
9300K 6500K 5000K Tolerance
x 0.2838 0.3132 0.3450 }0.003
Remark: In normally, adjust G for Luminance (Y), adjust R for x and adjust
B for y.
y 0.2981 0.3297 0.3580 }0.003
Y 10 10 10 }0.7
7. All mode recall Select OSD
"ALL
RESET"
function All mode recall:
press"CONTRA
ST"+"OK" then
"Power ON"